GM EPROM code info

[sag at msys.net]

Hello,
	Does anyone know of any software that will allow me to "play" with the
internal setting on my computer.  TBI is from an '86 S-10, 2.8L V6.

	I replaced my 2.8L in my '84 Jeep with the NEW 3.4L V6.  This OEM was
Carb'ed. I'm going to replace this with the 220 TBI system from this '86
vehicle. (I bought everything from a guy whose wife wrecked the frame.)

	What I want to do is:  Adjust the timing on the injectors to increase fuel
flow just enough to take advantage of the increased displacement of the
3.4L.  I've thought about the 'Performance Chips' from ADS, but that seems
like just a short fix.  Being an electronics/mechanic type, I would
basically like to try some different settings and see what happens.  So I
want to change the code, burn a new chip and give it a go.

	I need to also find someone who can burn me an eprom.  I may be able to
find someone local, but that'll take time.

	Any help would be greatly appreciated.

	ADS did suggest that I buy some of their 'STRIP Injectors' for the TBI,
but Summit has them for about $400!  Not practical.  Any ideas on that
would be helpful, too.

Thanks, Steve