Injector Driver Module

[mrvette]

All  I have to say on the power dissipation thing is that I have mucho
experience with comercially available products by Bendix that were used on
Caddy's of the mid-late 70's...and they were firing ~1.5 ohm injectors in a V8
configuration, 4 to a batch, and god for ~5500 rpm's
ran like a top....good design with no really noticeable heat given off by either
injectors or heatsink on computor.....

Same with later say 7730 design...using ~16 ohm injectors....
BTW  I have read coments that the ~16 ohm injectors may not fire reliably at -40
or so air temp.....Well, GM sells cars in Canada, don't they, and others also
use ~16 ohm injectors....GENE
-- 


                                ____________
Fun under the sun in          //~~~~~~~~~~~~\\
Jacksonville, Fl.  :-)))     //______________\\
                       /~~~---~   |      |   ~---~~~\
                      /|    /______\____/______\    |\
                    (( | /      |          |      \ | ))   
     Mako 'Vettes    | \============================/ |   
 Shift better with   |\ \\[  ]    |mrvette|   [  ]// /|
     Automatics      | \/+========================+\/ |
                     |~==============================~|
                     |_____|                    |_____|
-------------------------------------------------------------------