O2 Sensor Voltage max power

[Bruce Plecan]

-----Original Message-----
From: Sergey Stopov <efi335 at hotmail.com>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Friday, August 28, 1998 4:15 AM
Subject: RE: O2 Sensor Voltage max power


>
>Jim wrote:
>>
>>max power = 12.6 = .86 lambda = which ironically is about 860 mV
>>
>
>Is it experimental or theoretical data?

I've seen it in print, but please remember this as an aid to tuning,
NOT TO TUNE TO THIS VOLTAGE.

>Do you measured  it yourself or read it anywhere?

My engine likes .9v on the O2 signal, but this is after verifing with
plug cuts.

>If you measured it then on what car or engine?

My car happens to be a 350 CID Small Block Chevy, Non oem
parts.   Basically TBI.
Bruce
>
>Sergey.
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>