ME looking for EE education!

[Christopher Bruno]

TBK wrote:
> 
> I know Spice, but I never played with Pspice. I assume it just the UC Berk
> code with a new frontend.
> 
> But I can't read the Pspice files.
> 
> What's the question?
> 
> TK

The complete circuit is there except for the injector (and the
fact that I couldn't find a TIP120 NPN transistor so I used
a QN3764 or something like that).  However, because the injector
is not there that side of the transistor is tied directly to
+12V (which I assume would be bad anyways = direct short).  I
thought that there must be some kind of device I could place
there - perhaps a 'Voltage Probe' or something.  So then I would
be able to click on 'Simulate' and watch what the output should
be at that node graphically - just as if I hooked up a scope
to the real circuit at that point.  However, because I just started
using this Pspice today and have no real EE background, I'm sort
of at a loss as to how to finish this.  So I guess my
question is, how do I moitor the voltage in a circuit on the
simulation side of this program and what kind of device do I
put in instead of the injector?

Thanks!

-Chris