C3 EPROM socket
Robert E. Yorke
yorker at deltanet.com
Tue Jan 27 23:24:06 GMT 1998
Kevin:
I think what you're trying to do is a damned good idea; if you do come up
with a ZIF socket conversion, please let us all know what you did and what
hardware is involved.
What was the 24-pin IC socket that you used so far?
At 03:50 PM 1/27/98 -0500, you wrote:
>I am gradually getting closer to playing the PROM swap game...and...
>
>I have come to really hate those little plastic PROM holders in the C3 ECM's.
>Last night I managed to stick a standard 24 pin (machined pin) IC socket into
>the C3 without using that goofy plastic thing. I then plugged the PROM into
>this new socket. Everything seems to function and I made it all the way into
>work without it vibrating loose or anything.
>
>Has anyone tried something like this? I am actually thinking now of
plugging a
>ZIF socket into the above socket... and then
>PROM swaps will be NO problem...
>
>Any comments?
>
>________________________________________________
> Kevin Vannorsdel IBM Arm Electronics Development
> 408-256-6492 Tie 276-6492 kv at us.ibm.com
>
>
Riverside, CA
2 '88 GTs!
More information about the Diy_efi
mailing list