700R4 bptest

Mike Hoenes MHoenes at dhr.state.nc.us
Tue Jun 30 11:23:14 GMT 1998


ATSG makes a manual that lists all the upgrades. it is available at parts
stores that specialize in tranny parts. it has all the GM part numbers &
retrofit info. at $10, its a deal. while you are at it, get the Techtran
rebuild manual also.
 ----------
From: Brian Hartman
To: diy_efi at efi332.eng.ohio-state.edu
Subject: Re: 700R4   bptest
Date: Mon, Jun 29, 1998 3:40PM

I want to thanx for the help on upgrading the older 700r4's.  I have the
books
and know what to do but some of the post are helping narrow it down.  ALL of
the
performance mods that people are listing are in my manual but the older to
newer
upgrades is what I'm working on.  I will make it available on FTP soon so
you
all can use it.  Thanx for the help.  I'll be done soon,

Brian

owner-diy_efi at efi332.eng.ohio-state.edu wrote:

> change the front & rear sprags to new design. make sure that you have a 10
> vane pump. fairbanks billet 2-4 servo is nice too. corvette stock
converter
> has 2000 rpm stall. nice for the street.
>
> mike
>  ----------
> From: Brian Hartman
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: 700R4   bptest
> Date: Sat, Jun 27, 1998 5:51PM
>
> You might want to get a VB spring kit from Fairbanks to make sure your
Valve
> Body is up to snuff.  Remember to take your Pump to a tranny shop and have
> the
> 9/32" hole drilled throughout the oil return to aleviate pressure behind
the
> pump seal.  If you need help when you are in the middle of it just ask.
If






More information about the Diy_efi mailing list