Same MPU, different proms

[TBK]

I did it with the Syclone code in my 7730. I just moved the code to the
upper 128K (FFFF down).

TK
-----Original Message-----
From: Bruce Plecan <nacelp at bright.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Wednesday, May 13, 1998 5:40 PM
Subject: Same MPU, different proms


>On this 730/165 issue they both use the same processor, right?.
>The difference is one uses a 128K prom, and the other a 256K.
>Now, if ya offset load the 128 into the 256 you can run it, can you
>just run the 128K memcal?.  ie, use a 749 memcal in a 730
>for say a 6 cyl map, to 6cyl map application using all the same
>mechanicals?.  Of course assuming the wiring is right.
>Bruce
>
>