TBI manifold on OLD heads
Shannen Durphey
shannen at mcn.net
Tue Oct 13 18:54:18 GMT 1998
Woops! Forgot to add that I'd do it differently the next time. I'd
drill out the threads in the heads, drive some plugs in (with green
loctite on them), and set up a drill press to drill the holes at the
correct angle for the manifold. Yup, it's more work.
Shannen
Kevin Vannorsdel wrote:
>
> I guess this is EFI related...
>
> Has anyone out there been through the exercise of modifying a TBI manifold (SB
> Chevy) to fit onto a 350 with the "old" heads. This involves slotting and
> re-angling the center holes.
>
> I did it a year or so ago - and have a few questions/problems-
>
> 1) What bolts did you use to mount the thing?
>
> 2) Have they ever come loose over time?
>
> 3) Were you able to use a torque wrench on the center holes
>
> Any thoughts are welcome!
>
> ________________________________________________
> Kevin Vannorsdel IBM Arm Electronics Development
> 408-256-6492 Tie 276-6492 kv at us.ibm.com
More information about the Diy_efi
mailing list