700 Manual
Brian Hartman
brianhartman at sprintmail.com
Tue Oct 27 00:47:18 GMT 1998
Hey David,
I'll post it when it is done and save it in a better format that isn't so huge.
Talk to you soon
Brian
David wrote:
> Brian,
>
> I for one did not get a complete download last night.
>
> I would sure enjoy seeing the file available again.
>
> Thanks,
>
> David Edwards
>
> > -----Original Message-----
> > From: owner-diy_efi at efi332.eng.ohio-state.edu
> > [mailto:owner-diy_efi at efi332.eng.ohio-state.edu]On Behalf Of Brian
> > Hartman
> > Sent: Monday, October 26, 1998 1:22 AM
> > To: diy_efi at efi332.eng.ohio-state.edu
> > Subject: Re: 700 Manual
> >
> >
> > I want to thank Tom for acting so fast. He meant well. I requested it to
> > be removed simply because I wasn't done with it yet. I will have
> > a complete
> > manual done soon with different levels of strength and performance. I'm
> > designing several hard parts that will be made available that aren't being
> > made anywhere soon. I'm still here and will try to help answer your
> > questions and guide you through rebuilds. I have kits available with all
> > the parts and manuals, as well as, tips on rebuilding the 700's in your on
> > garage and how to test if you have it assembled properly. I've got them
> > available for Syclones, Typhoons and Corvette cores so far. Any 700 is
> > worthy of a rebuild but if it is 87 and down, a little care need
> > to be taken
> > in replacing some pieces. Then you can proceed in building it up for
> > whatever application you want. This is the part of the manual I have to
> > complete. I appreciate the help Tom was trying to provide, it was just a
> > little premature. I'll post it soon. I'll do the 200r4 next then the
> > 400/4L80E.
> >
> > Thanx guys,
> >
> > Brian Hartman
> >
> > Thomas Matthews wrote:
> >
> > > At Mr. Hartman's request, I've removed the 700 doc that I posted, due to
> > > his request that it is a work in progress.
> > > I apologize publicly to Mr. Hartman and the members of the list for my
> > > rash posting, and eagerly await Mr. Hartman's finished work.
> > > Tom
> >
> >
> >
> >
More information about the Diy_efi
mailing list