Won't go into learn

[Jim Sloan]

Also check 0x034B  KO2ATIME  O2 Sensor not ready timer   10 sec.

Jim Sloan

> Hi Bruce,
> is this chip heavily modded?
> As in a product of promgrammer ?
> If so, it might be wise to put the stock chip
> back in and see if the problem goes away.
>
> if you have access to the bin, might check
>   <<cut & paste from PromGrammer dump>>
> ADDR            TERM
> FACT. VALUE
> 0x034E  Frequency Of Block Learn Update                  1.10  Sec.
> 0x037A  Thresh. Above Which Learn Disabled              2000  RPM
> 0x0383  Vac. Load Above Which Blk Learn Is Disabled  0xE0  kPa
> 0x0384  MAP Load Below Which Blk Learn Is Disabled  0x60  kPa
> Obviously too lazy to get off my butt & do real work today.
> Mike V
>
> > I've got a Diacom run of a Syclone that isn't running right.  Everything
> >  looks good, but the odd thing is that learn stays off...  Is
> this  a clue
> >  that it's using a default value for something?.
>