Injector Selection

[Walter Sherwin]

Dave, Kinsler Fuel Injection is right in your backyard and they have a
tremendous selection of injectors.  They are also quite helpful people.
You can look them up at 1-248-362-1145 in Troy, Michigan.




-----Original Message-----
From: David Rhoads <rhoads at adi.com>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Cc: sdscott at engin.umich.edu <sdscott at engin.umich.edu>; desander at umich.edu
<desander at umich.edu>
Date: Wednesday, January 13, 1999 11:56 AM
Subject: Injector Selection


>I'm trying to track down a suitable set of injectors for the following,
>any suggestions would be greatly appreciated.
>
>apprx 19 lb/hr, 2.5gm/s ... @ apprx 40psi
>preferrably Peak & hold for a Port injection setup.
>I'll need to know the resistance for driver circuitry.
>Another preferance would be a cone valve with a narrow spray pattern.
>
>Application, manufacturer and part # is also needed for the folks at the
>parts counter.
>
>Most of the information that I've been able to find on the www
>seems to be missing at least one piece of this info.  Most tech
>departments aren't willing/able to provide the info needed for even
>thier own products.  Go figure!
>
>TIA
>
>--
>. David Rhoads II
>. Applied Dynamics International
>. 3800 Stone School Road, Ann Arbor, Mi 48108
>. (734) 973-1300
>. rhoads at adi.com   website:  www.adi.com