EECSucka

Andrew March amarch at icenet.com.au
Sun Jan 17 12:26:47 GMT 1999


Hi

This is a general post to Ford owners interested in reading the ROM
inside their EEC-IV engine control unit for educational, research or
archive purposes. For plans on building a J3 service port reader (known
as the EECSucka) see http://www.icenet.com.au/~amarch/eec.htm

I've placed the design into the public domain for the delectation and
amusement of home constructors. Anyone wanting a proper Printed Circuit
Board or built up unit should contact me at amarch at icenet.com.au

At this stage there is no PCB available - I'm just trying to establish
if there is enough demand to justify tooling up. The more replies I get
the sooner this will happen. Projected cost for a bare PCB is Australian
$20 assuming 10 purchasers.

Also, could those who have already built this unit please let me know
how you fared? Thanks.

As my mailing list subsription may not yet be working, please post
replies to amarch at icenet.com.au.

Thanks.

-------------------------------------------------------------
Andrew March                               PO Box 420 Subiaco
amarch at icenet.com.au                   WESTERN AUSTRALIA 6008
http://www.icenet.com.au/~amarch





More information about the Diy_efi mailing list