diy_efi Honda EGO Meter

[Frank F Parker]

> use. An owner of an NTK box, who's still on list and can vouch for this
> (right, Frank?), helped me to understand the OUTPUTS that an NTK
> interface produced under certain start-up and quiescent conditions. But
> there was NO reverse-engineering, no copying, or even viewing of
> circuits. The owner of that NTK box did NOT break it's warrranty seal
> nor look inside AT ALL, on my behalf. That same "you're being two-faced"

This is correct. Box is still in use todayand remains sealed. Only outside
voltage and current tests were made to decode the processing used.

frank