FI fuel line

[andy quaas]

What kinda TBI was that?  The 4bbl ones have NPT fittings.

andy


---Vinnie Moscaritolo <vinnie at vmeng.com> wrote:
>
> 
> 
> At 5:00 AM -0500 3/23/99, Vance Rose wrote:
> > Have done the same also - works very nice. Saw a post where
someone silver
> > soldered joints in tubing to make custom lines. Only way i've
found to get
> > saginaw ends for my pu.
> >
> 
> 
> I wanted to use AN fittings in conjunction with my Holley TBI unit. 
> Since Holley used a non-standard thread (or at least one I couldn't 
> find. maybe they are Saginaw..) on the TBI and I couldnt find an 
> adapter to AN, I cut the Holley connector and silver soldered 
> (welded) it to a steel AN fitting.  I also did the same thing to the 
> Holley supplied (Carter?) fuel pump..
> 
> Not to change the subject much but speaking of Holley EFI's I have 
> heard that some folks run a primary pump (Holley Red pump)  near the 
> tank and then the high pressure pump closer to the TBI. I am curious 
> if this is necessary and  how many people actually do this?
> 
> 
> Vinnie Moscaritolo
> http://www.vmeng.com/vinnie/
> PGP: 3F903472C3AF622D5D918D9BD8B100090B3EF042
> -------------------------------------------------------
> 
> Those who hammer their swords into plows,
> will plow for those who don't."
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com