Chip for Northstar
Chris Moore
northstar87 at hotmail.com
Mon Mar 29 13:28:26 GMT 1999
Hi,
I did hook up the brake module which is the traction control and the
abs control computer. I do not have any wheel inputs though. How can I
get this to work? Explain more about the GM CAL Docs. Thanks.
Chris Moore
>From: "David A. Cooley" <n5xmt at bellsouth.net>
>Reply-To: diy_efi at esl.eng.ohio-state.edu
>To: diy_efi at esl.eng.ohio-state.edu
>Subject: Re: Chip for Northstar
>Date: Mon, 29 Mar 1999 07:54:53 -0500
>
>At 04:06 AM 3/29/99 -0800, you wrote:
>>Hi,
>> I have a very unique car. I have a 1987 Fiero GT with a 1995
>>Cadillac Northstar. It runs great but it will not peel out. I only
>>know of about 5 of these projects in the Nation and they all have this
>>problem. My engine only has 16,000 miles on it. (just for you info).
I
>>think that it is the Torque Management located in the PROM. Torque
>>Management was to make sure you do not peel out under a heavy load
>>situation. It kills injectors and plays with the timing. It is all
>>explained in the GM manual. I had Super Chip try to make a chip for
me
>>and they said that they could take care of the problem. It still did
>>not fix it. I was wondering if you guys could help me out? Please
let
>>me know. Thank you.
>
>Chris,
>Did you transplant the ABS and Traction control as well?
>If not, that may be the problem... The Caddy PCM looks for input from
the
>ABS and TC modules... If it doesn't see it, and the chip still thinks
the
>modules are there it will severely torque limit thinking there is a
problem
>that could cause loss of control.
>You need to find someone with the GM Cal Docs that can disable the
ABS/TC
>parameters.
>===========================================================
> David Cooley N5XMT Internet: N5XMT at bellsouth.net
> Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
> I am Pentium of Borg...division is futile...you will be
approximated.
>===========================================================
Get Your Private, Free Email at http://www.hotmail.com
More information about the Diy_efi
mailing list