Injectors & harness

[CLsnyder]

----- Original Message -----
From: Dave Williams <dave.williams at chaos.lrk.ar.us>
To: <diy_efi at efi332.eng.ohio-state.edu>
Sent: Tuesday, May 04, 1999 4:16 PM
Subject: Re: Injectors & harness


>
> -> Ok.  Then the 4.3W and the Syclone don't share injectors.  The W
> -> engine has one injector connected to 6 poppet nozzles, each through a
> -> hose.  Looks a little like a deformed spider.
>
>  "Poppet nozzles"?  Is there some sort of breakover valve involved?  If
> so, how do they keep all the gas from going through the first poppet to
> unseat?
>
>  That's why the Bosch K-Jet has a separate fuel pressure regulator for
> each injector.
>
>
There is an "injector" for each cyl according to the information I had on
the subject. They are all in one housing, with K-Jet style nozzles on the
ends of the "spider-legs"