Misc Electronics

[goflo at pacbell.net]

If I understand what you want to do, look at "DIP component headers".
Or use a "machined pin" DIP socket, cheaper, and solder the wires
into the pin receivers. Just don't melt the socket doing it. :)

If you've got a current Mouser catalog see pages 162-172.
If not 800-346-6873

Jack

Bruce Plecan wrote:
> 
> How, or is there a safe way to "open" the guts of an EPROM,  that is so that
> a ribbon cable can be soldiered to it, for using a remote prom/emulator.
> 
> After a 3 month wait, I got a Radio Shack, PC/laptop 2 Oscilloscope probe
> (They had run out at the master distribution center).
> For the EEs probably it has little to offer but, least for me, I got to see
> what the ALDL looks like..
>    One big feature is that you can pick what colors contrast best for you.
> So us ol timers can see what going on.
>    On a side note, is there enough interest for me to put together some
> notes on an ecm bench?.  I got some digitial photos, to go along with it,
> just don't want to clutter the DIY stuff if not many are interested.
> Bruce