What's up with this list?

[JN]

Disregard my last post.  I just realized I am posting to the wrong list.

My apologies,
JN
----- Original Message -----
From: "JN" <jwn at sgi.net>
To: <diy_efi at diy-efi.org>
Sent: Saturday, August 12, 2000 10:33 AM
Subject: What's up with this list?


> I have posted a couple questions about the relationship between block
learn
> cell numbers and MAF tables.  Car is an 89 Corvette.  Actually I posted
the
> same question twice and have not had even one response.  I don't
understand
> this.  I educated myself as much as I could before joining looking at
> archives and reading programming 101 and Bruce Plecans tuning tips.  More
of
> you people seem to be working on speed density systems and not MAF
systems.
> If anyone would be willing to answer a few simple basic questions for me
it
> would be appreciated.  I am not going to ask tuning advise.  I can figure
> that part out on my own.  I do however need guidance on some of the tables
> and what they control.
>
> For instance:  I have the GMEPro software.  There are 6 MAF tables and a
> scaler for each table.  What do these affect?  It seems by changing the
> scaler you can affect the entire table.  The constants are listed as
counts.
> Counts?  What is meant by counts?
>
> Second, Say when I build my 383 and install 30 lb injectors.  My closed
open
> loop idle will be way rich.  How do I reduce IPW at idle with the bigger
> injectors?
>
> These questions don't seem too off the wall for this list.  Anyone out
there
> willing to help?  Not everyone can start out as an expert.  Am I just
having
> a bad day?
>
> Jason Norris
> 89 Vette, Eager to Learn, Looking for help
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org