Aspin engine

[Greg Hermann]

>Check on the web for the Aspin engine.
>It used a rotating cone arrangement for a combustion chamber, with a hole
>cut in the
>cone that aligned with first the inlet then the exhaust at half crank RPM.
>From what
>I remember it gave a near perfect stratification to the intake charge with low
>emmissions and excellent fuel consumption. Only problem was sealing the cone.
>
>Neil
>
You slip the word "ONLY" in there so casually, Neil!

Done the way an investment banker trying to sell stock in the thing would
do it!! :-)

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org