Programming Basics 61 Corvette with 91 TPI and 6 speed Transmission

[Dan Plaskett]

Well I have a new chip for my 61 Corvette TPI project.  91 L98 Corvette with
6 speed transmission.  I have the Data I/O chip burner communicating with
the computer via promlink version 3.4 and I have been able to read the chip
into RAM.  I created a file called AXCN.bin and got a successful operation
and a sumcheck that matched the chip when read and verified.  I am confused
however and believe I may have done something wrong.  The file size is 88K.
I thought that the size would be limited to 32K which is the size (I thought
of the eprom).  The I/O format selected in promlink is Motorola Exormax
(this came up by itself).  I tried to change that to binary but got an error
message that I had selected an invalid format.  There are 43 different I/O
formats available but only a couple don't result in error messages.  What
about the file size?   Does this seem right?  When I'm sure this is OK I'll
post to the incoming site but I certainly don't want to post something that
isn't correct.  Any ideas from you pros is certainly appreciated.

Dan Plaskett

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org