Affordable Wideband ECUs - How to?

[Garfield Willis]

On Fri, 31 Mar 2000 16:44:28 -0500, Scott Knight <scott at scottknight.com>
wrote:

>Actually, there is an 8-place (4+4) rectangular gray connector with 7
>terminals.  The 5 wires seem to directly go to 5 of the terminals, while
>the other 2 terminals are above a square block part of the connector. 
>Very obviously the resistor, and it measures out to real near 10k ohms. 
>This sounds like it must have the Honda connector to me...

Yup that's it, and the cal resistor is well within the range of
Honda-NTK sensors, but also most definitely *outside* the range of an
NTK-direct sensor. Bingo.

Gar


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org