looking for air bypass solenoid

[Moore]

AC idle control on Honda and Toyota.  They vent to atmosphere and are
normally off use 12 volts.  You can get them almost for free off firewalls
in the junkyard
Or about 35.00 at the dealer


Frits 

On Tue, 10 Oct 2000 14:30:35 -0400, diy_efi at diy-efi.org wrote:

>  
>  
>  I am looking for an economically priced air bypass solenoid.  I would
consider
>  either one that operates with a uniform voltage (on/off) or one that is
capable
>  of using a variable voltage that would yield proportional air bypass.  Is
there
>  anything that was used domestically - Ford, GM or Chrysler -  that I
could pick
>  up from my local auto supply store?  Maybe such a solenoid was used for
A/C (on)
>  idle control?  My knowledge of available sensors / solenoids is very
limited.  I
>  am looking to add the equivalent of an electric choke to my Motronic M1.5
>  adaption to an Isuzu 2.3L to increase the rpm for the first few minutes
of
>  operation.
>  
>  If so, year range, engine family and model of the potential donor vehicle
>  please.  Thanks in advance.
>  
>  
> 
----------------------------------------------------------------------------
>  To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>  in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>





_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org