Lucas injectors

[J. Creech]

Many thanks, Mr. Sherwin. Just wanted to know more about another piece of
junk I've managed to accumulate ;)

Scott Creech


----- Original Message -----
From: "Walter Sherwin" <wsherwin at home.com>
To: <diy_efi at diy-efi.org>
Sent: Sunday, October 29, 2000 2:06 PM
Subject: Re: Lucas injectors


> Those injectors are indeed from the Saturn 1.9L DOHC.  The coil is low
> impedance @ 2.05 ohms.  They flow about 17.4 #/Hr @ about 43.5 psig
> differential pressure.  They later change-up to service part number
> 17109718........
>
>
>
> > Well, the Saturn TwinCam engine I got the throttle-body off of, I also
got
> > the injectors and fuel rail. Also all the sensors (knock, temp, oil
press,
> > crank-trigger). The injectors appear to be Lucas-style, stylized "R"
> > (rochester) on the side of the connector boss, plastic and aluminum
shell,
> > stainless internals (what I can see). Marked " 9122    17106488" . They
> each
> > have 6 orifices on the nozzle end. The Fuel-rail is an Aluminum
extrusion,
> > marked " AC    ROCHESTER  USA         21006548    2652  1R".  I know
that
> > doesn't really help anything. But, anybody have any idea what the
> injectors
> > flow? Just curious.
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org