Source for small throttle bodies

[J. Creech]

Probably Holley was the Mfgr. Their 1 bbl carbs are built the same way, and
both are on thousands of Slant-Six's.


----- Original Message -----
From: "Carter Shore" <clshore at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Sunday, October 29, 2000 11:25 AM
Subject: Re: Source for small throttle bodies


> When I rebuilt the carb on my Dodge slant 6, I noticed
> that the twin butterfly throttle body was a seperate
> piece, a flat plate maybe 1/2" thick that bolted onto
> the main carb body. It would be easy to adapt this
> piece to just about anything.
> I do not recall the carb manufacturer, but they built
> millions of these things, so junkyards ought to be a
> good source.
>
> Good luck,
>
> Carter Shore
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Messenger - Talk while you surf!  It's FREE.
> http://im.yahoo.com/
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org