Fuel Pressure Sensor

[rr]

I knew I saved this for a reason:

Re:Mustang Fuel Rail Pressure Sensor

Off the box 99 Mustang sensor F8CZ-9F972-BE
Used on 99 and newer Ford cars and Trucks.


BobR.


Scott Flanagan wrote:

> Just standard fuel pressures for a Bosh LH Jetronic, I am trying map out a
> rising rate fuel pressure regulator, topping out no higher than 80 psi I
> think.  I am looking to get one from the junkyard, but I don't know of any
> OEM cars that use one,
>
> James Scott Flanagan
> Mechanical Engineering Undergraduate
> Georgia Institute of Technology, Atlanta Georgia, 30332
> Email: gte861v at prism.gatech.edu
>
> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Programmer
> Sent: Wednesday, February 21, 2001 10:18 PM
> To: diy_efi at diy-efi.org
> Subject: Re: Fuel Pressure Sensor
>
> What range of pressure will you be requiring ?
>
> Lyndon.
> ----- Original Message -----
> From: James Scott Flanagan <gte861v at prism.gatech.edu>
> To: <diy_efi at diy-efi.org>
> Sent: Wednesday, February 21, 2001 1:07 PM
> Subject: Fuel Pressure Sensor
>
> > Where could I find a fuel pressure sensor cheap?  Are there any OEM
> > sources I could get out of a junkyard?  Thanks,
> >
> >
> > James Scott Flanagan
> > Mechanical Engineering Undergraduate
> > Georgia Institute of Technology, Atlanta Georgia, 30332
> > Email: gte861v at prism.gatech.edu

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org