Hi, and a few questions

[Grant Crockett]

Hi,
I am new to the diy-efi mailing list, so I'll start
off by apoligizing for asking any questions that were
covered recently or seem trivial to some of you.  I
have been a member of several email lists before and I
always chuckle at the "new guy" questions, but now the
tables are turned so-to-speak.

Is there an archives to search?  Perhaps then I could
answer some of my own questions and not cause traffic
on the list.

Is there a FAQ?  For the same reasons?

I am turbocharging my VW Jetta and I will be needing a
system to augment or replace the Digifant (L-jetronic)
stock system.

And now for the real question to reveal my
"newbieness"  Bosch injecors - are they at all
interchangable?  I will obviously need increased flow
rates for my above mentioned project, but I have no
idea what I should be looking for.  I found an injecor
sizing calculator on the net someplace (perhaps RC
Engineering) and for my target of 150-160HP I will
need 300-315cc/min injectors.  This is obviously just
a rough estimate to size injectors, but that would at
least get me in the ballpark right.

end 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org