Simple injector questions

[Steve Ruse]

Dave, I appreciate the advice. I did look around at a few local junkyards,
but didn't find much that looked like it was at least in fair condition.
Sounds like I should go browsing around a little more. I'm still pretty
"green" to all of this.

What is a good place to find information on injectors I pull from a specific
car?

Thanks,
Steve Ruse

-----Original Message-----
From: Dave Williams <dave.williams at chaos.lrk.ar.us>
To: diy_efi at lists.diy-efi.org <diy_efi at lists.diy-efi.org>
Date: Monday, February 26, 2001 8:24 PM
Subject: Simple injector questions



-> I'm about to order injectors for our 600cc Honda F3 engine, the
-> injectors I am leaning towards now are the 14lb/hr or 15lb/hr accels
-> at
-> http://cruzinperformance.com/repinjectors.html .

Not to be a smart-ass, but 14 pounds is a pretty common injector size
for Ford and Chevy four cylinder cars as well as the gray-colored
'87-'93 Ford Mustang 5.0 injectors.  Given the likely difference in
price, you could have them cleaned and install new O-rings and still
come out way ahead financially.

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org