Haltech/igniton issues,combat together to make one BIG issue.

[Timo Leppälä]

On Tue, 27 Feb 2001, Kris Weldy wrote:

> 
> I called Bob Norwood as he seemed to be of more help than the haltech office
> here in Dallas(they just tell me -"oh its your plug wires" then dismiss the
> whole thing),and Bob said that the His experience was that  the haltech was
> really sensitive to interference(rf and so forth) and to keep the tach wire
> that goes from the coil-to the haltech away from all other wires as much as
> possible.I tried this and it didnt work.

Try use some ferrite beads, rings etc, close to the haltech. That might
get rid of rf.

>Maybe the 10 k resistor will
> work,where do i find one and where do i put it,as i cant get a tach signal
> from anywhere else,but my coil.

Resistor works atlesast with the reluctor sensors. Maybe some volvo people
could answer if tach signal could be obtained elsewhere?

>Thanks very much for the info,Thanks Timo for
> your reply!Where are you from?

Espoo/Finland (Been in Arlington,TX years ago =) )

> Thanks again.
> --
> Kris Weldy (AIM: VolvoFam3)
> Arlington, TX
> '87 760ti, 20psi w/B23FT, TO3/04E turbo, many mods
> 


---------------------|
|   Timo Leppälä     |
| tleppala at cc.hut.fi |
| +358 (0)40 7352352 |
|---------------------

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org