Chrysler/Dodge OBD II scan tool hardware and software

[Programmer]

I've used the MasterTech with Mopar cartridge and it gives erroneous
data--still found the MT2500 SnapOn to be the most reliable...but I can't
say about the Vipers--haven't had one in the shop. However--never had
problems with the trucks.

Lyndon.
----- Original Message -----
From: Jason R. Haines <jhaines at lingenfelter.com>
To: DIY_EFI <DIY_EFI at lists.diy-efi.org>
Sent: Tuesday, February 27, 2001 1:52 PM
Subject: Chrysler/Dodge OBD II scan tool hardware and software


> Does anyone know of scan tool software that works with the Chrysler/Dodge
> ECM's - specifically the ECM's used in the Dodge Vipers? The Vipers use
> modified versions of the Chrysler truck controllers (I think they are
called
> JTEC for the OBD II versions). We have the Chrysler DRB III scan tool but
we
> need to be able to log the data and look at it later (on a PC for
example).
> We have the Ease Diagnostics and the Autotap scan tool software/hardware
but
> neither of them currently support the Chrysler applications yet.
>
> Also, has anyone used Tech 2 with the Chrysler cartridge? If so, does it
> work well and does it work with a Dodge Viper? I called OTC and then don't
> know if the Tech 2 Chrysler cartridge works with OBD II Dodge Vipers. Has
> anyone used the OTC Tech 2 data logging software to download snapshots
from
> a Tech 2?
>
> BTW - does a Chrysler calibration list exist (sort of like the GM ECM
list)?
>
>
> Regards,
>
>
> Jason
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org