Off Topic - So I'll Keep It Short - Pistons

[Jamie]

They'll hold up to lots of boost or NOS as long as you never go lean or add
a little too much timing.  Just one detonation with big power adders and
you'll have nothing but donuts and wrist pins left.


----- Original Message -----
From: "Walter Sherwin" <wsherwin at home.com>
To: <diy_efi at diy-efi.org>; <gmecm at diy-efi.org>
Sent: Saturday, January 13, 2001 10:29 PM
Subject: Off Topic - So I'll Keep It Short - Pistons


> Have any of you boost or NOS guys run the Keith Black Hypereutectic
pistons
> in your mills?  Anything good or bad to report about them?  On the surface
> they sound intriguing VS a set of noisy forged jobbies on the street.
>
> Now for the link back to EFI content...........these will be fed by twin
> TBI's and a 7060 'puter and a 3bar MAP sensor.
>
> Thanks;
> Walt.
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org