Wreckers, efi parts, which ones?

P.J.Berg BergRace at c2i.net
Sun Jan 21 18:15:08 GMT 2001


Go to www.PerfectPower.com  (South Africa)
The ECU is the cheapest, the MIC3 runs at 423,-U.S.$ including all sensors
comunication cable at two-2 Ignition amplifiers.

Tell them BergRace sendt you.




P.J.Berg
BergRace at Aircooled.net





----- Original Message -----
From: "Wes Branchflower" <hemi_265 at hotmail.com>
To: <diy_efi at diy-efi.org>
Sent: Sunday, January 21, 2001 6:03 PM
Subject: Wreckers, efi parts, which ones?


> I'm making a multiport EFi setup for my 265cu (4.3L) hemi six.
> I've got the manifolds pretty much on their way, but, i'm just a little
> stuck with the rest of it.
>
> Does anyone recommend a good EFi computer, which is easily programmed, and
> is available relatively cheap?
>
> Also, i'm weighing up between sensors, and i'll probablty be using a MAF
as
> i'll be using a fairly lumpy cam, which might upset a MAP sensor?
>
> I'm looking to source things from a wreckers, and wanting to keep on a
> budget. I already have a Ford XF 4.1 litre throttle body/TPS +
> injectors/fuel pressure regulator.
>
> Are the following all I need for my setup:
>
> MAF Meter
> Throttle Position Sensor
> Crank Angle sensor (or can i just do it from the coil?)
> Coolant Temp Sensor
> Fuel Pump
> Fuel Pressure Regulator
>
>
> MAF Meter - Do popular aftermarket ECU's accept both MAP or MAF sensors.
>             Does it matter what 'size' a MAF is? Any suggestions for a
> make which I should look for? (Ford? Holden? etc?)
>
> Throttle Pos Sensor - I have the one which came with the XF Ford throttle
> body, It doesn't seem to have any output except WOT and IDLE.
> Either that or it's broken.. :( Is this all i need?
>
> Do I need a crank angle sensor for plain multi-port efi? (not sequential)
>
> Do i need a coolant temp sensor? are their any makes/models that I can
pull
> one from at a wreckers if so? where are they located?
>
> Fuel Pump - Will a stock ford EFi pump do? I'm using the ford injectors
and
> pressure regulator.
>
> Any input greatly appriecated.
> Thanks.
>
>
>
>
>
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list