Question for those who have completed DIY-WB assembly

[Bruce]

From: "Stephen Andersen" <SAndersen at advan-tek.com>
Subject: Question for those who have completed DIY-WB assembly
> I am currently assisting with 2 other listers in developing
> the LCD display board to add to the DIY-WB.  I am working
> on mechanical layout for the two boards to fit into an enclosure to house
> the display, buttons, DB-9 output connector, and wire "harness".  This
> will ultimately result in detailed assembly drawings and
> drawings for the required cutouts/mods to the enclosure.
> I need to know the maximum height of any given components that
> "stick up" off the WB PCB after it is assembled.  Obviously
> accurate measurements are better, as "about a 1/2" isn't going
> to conclusively answer any questions for me until I get my
> own board assembled!   Can anyone help me?!?!?!?

Total height including the board (.065) is .740.
This is the max of 5 that I have here, 4 using Steve D's component kit.
Bruce
   Cool on the display!


>
> Thanks in advance for the info!!
>
> Steve
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org