Question for those who have completed DIY-WB assembly

[Steve.Flanagan at VerizonWireless.com]

Steve,

Keep in mind, some of those parts could be bent down to give a little more
clearance, is mostly the large Caps that take up the most height, but those
could be mounted on an angle to give more clearance.

The project Box I am using is 2 inches deep, so should leave plenty of room.

Also, the project board can be mounted on the plastic stands (included from
Steve C parts kit) two separate ways.  With the components facing away from
the aluminum plate (this takes up the most space), or the PCB could be
mounted with the components between the aluminum mounting plate and the PCB
(this gives the most amount of spare room) probably at least 1.75 inchs of
spare room.

What size box are you working with, and how much room do you need?

Hope this info helps.

Steve F

-----Original Message-----
From: Stephen Andersen [mailto:SAndersen at advan-tek.com]
Sent: Thursday, November 08, 2001 8:21 AM
To: 'diy_efi at diy-efi.org'
Subject: RE: Question for those who have completed DIY-WB assembly


Thanks Bruce.  It's a-gonna be tight!!!!

Steve

> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Bruce
> Sent: Sunday, November 07, 1999 9:54 PM
> To: diy_efi at diy-efi.org
> Subject: Re: Question for those who have completed DIY-WB assembly
>
> Total height including the board (.065) is .740.
> This is the max of 5 that I have here, 4 using Steve D's 
> component kit.
> Bruce
>    Cool on the display!
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org