Question for those who have completed DIY-WB assembly

[Bruce]

Bending them over would just get you to .6"
There are caps that are radial, and trying to make this really compact is
going to generate problems for the less electronically inclined..  Remember
this is for the average guy, not just the EE types.  Or at least it is
intended to be.
Bruce

From: <Steve.Flanagan at VerizonWireless.com>
Subject: RE: Question for those who have completed DIY-WB assembly
> Steve,
> Keep in mind, some of those parts could be bent down to give a little more
> clearance, is mostly the large Caps that take up the most height, but
those
> could be mounted on an angle to give more clearance.
> The project Box I am using is 2 inches deep, so should leave plenty of
room.
> Also, the project board can be mounted on the plastic stands (included
from
> Steve C parts kit) two separate ways.  With the components facing away
from
> the aluminum plate (this takes up the most space), or the PCB could be
> mounted with the components between the aluminum mounting plate and the
PCB
> (this gives the most amount of spare room) probably at least 1.75 inchs of
> spare room.
> What size box are you working with, and how much room do you need?
> Hope this info helps.
> Steve F

> From: Stephen Andersen [mailto:SAndersen at advan-tek.com]
> Sent: Thursday, November 08, 2001 8:21 AM
> To: 'diy_efi at diy-efi.org'
> Subject: RE: Question for those who have completed DIY-WB assembly
> Thanks Bruce.  It's a-gonna be tight!!!!
> Steve

> > Behalf Of Bruce
> > Sent: Sunday, November 07, 1999 9:54 PM
> > Subject: Re: Question for those who have completed DIY-WB assembly
> > Total height including the board (.065) is .740.
> > This is the max of 5 that I have here, 4 using Steve D's
> > component kit.
> > Bruce
> >    Cool on the display!


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org