Switches or relays?

Robert W. Hughes rwhughe at ev1.net
Fri Nov 9 16:19:30 GMT 2001


> However with 6 coil packs and 2
> plugs leads on each pack, I'll have 6 left over plug
> leads. So what else I wanted to do was to Y the 2 plug
> leads on each connector together to 1 plug.

When using a waste spark coil as a single ended coil the other lead must
be tied to ground for a complete current path. If you tie both leads
together, you have just shorted the coil and will get no spark.
-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W or perhaps 30:55.265N, 95:20.590W
Houston, Texas "The city with too much Oxygen"
rwhughe at ev1.net
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list