pressure regulators

[Steve.Flanagan at VerizonWireless.com]

Lyndon,

looking to making a control for the waste gate that is solid state, just
tossing around some ideas and seeing what devices are already available.

What is EPC?

What is PCS from a 4L80E/4L60E????

What is an accumulator????

Steve

-----Original Message-----
From: Programmer [mailto:nwester at eidnet.org]
Sent: Thursday, November 08, 2001 7:14 PM
To: diy_efi at diy-efi.org
Subject: Re: pressure regulators


Steve,

Do you need to bleed pressure off or ... for example an EPC solenoid from an
E4OD transmission or PCS from
a 4L80E/4L60E--or could you use an accumulator from
an electric brake system ?

Lyndon
----- Original Message -----
From: <Steve.Flanagan at VerizonWireless.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, November 08, 2001 3:47 PM
Subject: RE: pressure regulators


> Bruce,
>
> Looking for regulator for completely different application.  Just need a
> source of a few places I may find a device that can control pressure using
a
> voltage or current circuit.
>
>
> -----Original Message-----
> From: Bruce [mailto:nacelp at bright.net]
> Sent: Monday, November 08, 1999 4:02 PM
> To: diy_efi at diy-efi.org
> Subject: Re: pressure regulators
>
>
>
>
> Not meaning to rain on your parade.
> But, remember as you increase pressure you decrease volume.
> You can get into really sticky wiketts with this sort of thing.
> It's far better, IMO, to run a large injector, and lower pressure then
> trying to make something into something it isn't.
>
> BTW,
> In my little world, I don't use the .5 #/hr stuff to figure what injectors
> to use.
> If I want to double the HP of an engine I use double the injector.
> If it puts me into Peak and Hold Injectors so be it.
> Bruce
>   Doc is responsible for the "wikett" word....
>
>
> From: <Steve.Flanagan at VerizonWireless.com>
> Subject: pressure regulators
> > Does anyone know of a cheap source for a Voltage or Current controlled
> > pressure regulators?
> > I know of Norgren already.
> > TIA
> > Steve
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org