diy o2 and tpi question

[steve ravet]

It'll display a voltage which you then have to convert to AFR in your
head or with the table.  The "Non standard voltage input" part won't
work well since the voltage to AFR conversion is not linear.  The rich
portion is kinda linear, you could approximate with a line from 10.0 to
14.7 and get within .5 or so.

Don DRI05 Ricciardiello wrote:
> 
> Would this work? especially the bit that talks about "Non Standard Voltage
> Input"
> 
> http://kitsrus.com/projects/k127.pdf
> 
> Cheers
> 
> Don

-- 
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org