WB Display.

[Shannen Durphey]

Somebody set Doc onto this one!  He's got the Meter and Furlong down, now what
the heck is
a Maor?? <g>


As a helpful suggestion, make sure the meter has a large enough needle to be
viewable at a glance.  With an AFR go/nogo gauge I'd be looking for something
other than pinpoint accuracy.

Shannen

bcroe at juno.com wrote:
> 
> That would work; the meter would provide some
> damping too.  Get a 1 Maor more sensitive movement
> and drive it directly from the Vout amp without the
> 1K resistor.  A center zero would would work, and tie
> the return lead to virtual ground to get rid of the
> 2.5V or 3 V offset.
> 
> Bruce Roe
> 
> On Mon, 22 Oct 2001 19:43:13 -0400 "Clare Snyder" <claresnyder at home.com>
> writes:
> > How about a high impedance analog meter with
> > the scale customized to read A/F ratio - put on a
> > coloured scale indicating green in the "go "zones,
> > and red in
> > the "no go" zones, with actual ratio printed as well?
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org