ford questions

Bob Wooten r71chevy at earthlink.net
Fri Sep 7 06:46:22 GMT 2001


Mike,

one thing I forgot to mention was that we used to sell Echlin & their rep
said that the modules that they make for Motorcraft are different than the
ones that they make for everyone else.  He said that it was a patent issue
or something like that.  what module is on that car?  if it is not a
Motorcraft try putting one on.  I Proved this to be true in my 302 & also in
a co-workers 1 ton truck (390/460 whatever it is).  the issue was idle
quality.  IIRC, that is an EECIV.

BW

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Mike Swayze
Sent: Thursday, September 06, 2001 6:56 AM
To: diy_efi at diy-efi.org
Subject: ford questions


Been a while since I've posed a question to any of the lists, here goes.
A girl here at work drives a Thunderbird Turbo Coupe and has had a problem
with it stumbling for ten minutes or so at  about the time it warms up. She
has replaced the fuel filter and done a complete tuneup and had the car on a
'diagnostic' machine for about two hours. I had a similar problem with a
ford ranger v6, but replacing the fuel pump fixed it. The fuel filter she
replaced is under the car about where the seat is. Are there any other
filters in this car that would cause the 'stumbling' problem? The
'diagnostic' did not show anything wrong. I am not real familiar with the
ford cars, would a vacuum connection somewhere cause this (egr?,etc.)?
TIA
Mike
Swayze
mswayze at truswood.com
kswayze at bellsouth.net


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list