[Diy_efi] Tuning with too much power for dyno?

[Adam Wade]

--- Matt Porritt <porrittm at anet.co.nz> wrote:

> I have toyed with the idea of using say 20 of oil in
> an external reservoir, with cooling on that..
> Whether or not it will work is another thing.
> I've seen oil temps in these environments jump
> around 200deg F in a matter of 3-4 sec on the
> transbrake with a bit of power going through the
box.

I might recommend a fluid/air heat exchanger with
separate pump (mechanically driven if you're concenred
about electrics), which would receive cooling air on
the track, and fan air on the dyno.

=====
| Adam Wade                       1990 Kwak Zephyr 550 (Daphne) |
|   http://y42.photos.yahoo.com/bc/espresso_doppio/lst?.dir=/   |
| "It was like an emergency ward after a great catastrophe; it  |
|   didn't matter what race or class the victims belonged to.   |
|  They were all given the same miracle drug, which was coffee. |
|   The catastrophe in this case, of course, was that the sun   |
|     had come up again."                    -Kurt Vonnegut     |

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi