4017 guestion

[RichM]

yes Bruce, should be fine. If the same output is driving something else, it
may be worth just checking the signal levels are OK, but just driving the
LED on it's own will be OK.
Cheers
Rich
----- Original Message -----
From: Bruce <nacelp at bright.net>
To: <gmecm at diy-efi.org>; <diy_efi at diy-efi.org>
Sent: Sunday, February 16, 1997 1:37 AM
Subject: 4017 guestion


>
> Will a 4017 drive a single LED thru a 1K resistor on 12v, OK?.
> (for my ecm bench).
> I'm using it for a divide by 6 to get a cam synch signal for my ecm
bench?.
> TIA
> Bruce
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org