[Diy_efi] BHP calculations

[MarkoNTL]

> The original post was how to calc HP.
> If the O2 level varies that will effect the HP generated.
> Excuse me for ignoring your attempt to change the topic of discussion now,
> so that you can attempt to be correct.
> Bruce

To calc the HP you don't need to know what the oxygen content is - this
weight through this rolling/air resistance etc in this time = this hp.

To know whether a change in HP was down to tuning or a cahnge in the
atmosphere though you "need" to know oxygen content?

If the testing is done on the same stretch of road, same altitude etc; then
surely pressure/humidity/temperature will be more than enough - oxygen
content doesn't vary that wildly on the open road does it?


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi