[Diy_efi] winbin help with Audi bin's

[Antti Lehtonen]

I have 90's Audi with motronic ecu,
I just found out these nice programs,
winbin and promedit.

Problem: Audi uses two bins to run
one for boost and related stuff and
one for ignition and gas. I have adress
for several maps but I cannot produce
working .ecu file, even the .ecu created
by promedit using F5 key is not valid
for winbin, what do I do wrong?

.ecu file and bin files can be mailed if any
one needs..  bin file is 32k in size maps
are 16 by 16.

Antti.

ignition .ecu file as follows:
/*format =2*/

/* General */
{
/*ecuId                     =GM_C3_ECM,
/*fileSize                  =8000,
/*checkSumAddr              =6,
/*checkSumSize              =2,
/*checkSumStartAddr         =8,
/*checkSumEndAddr           =3FFF,
/*Items                     =2,,
};

/* Item 1: Ignition */
{
/*startAddr                 =71f8,
/*columns                   =16,
/*rows                      =16,
/*elementSize               =2,
/*bitMask                   =0,
/*offset                    =22.5,
/*mulOrDivOrBit             =0,
/*factor                    =1,
/*map_name                  =Ignition,
/*ylabel                    =RPM,
/*yaxis                     =700 1100 1600 2000 2500 2750 3000 3500 3750
4000 4500 4750 5000

6000 6500 7000,
/*xlabel                    =Degrees,
/*xaxis                     =6 13 19 25 31 38 44 50 56 63 69 75 81 88 94
100,,
};

--------


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi