June 2002 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Jun 1 21:42:01 GMT 2002
Ending: Sun Jun 30 15:29:46 GMT 2002
Messages: 499

• [Diy_efi] phillips xag49 engine management   Kent Martin
• [Diy_efi] Use O2 sensor on motorcycle?   bcroe at juno.com
• [Diy_efi] Knock Detection using GM ESC Module   Bobby Riggs
• [Diy_efi] MEFI ECM, LT1 PCMs, Hypertech chips, stock chips, programmer on ebay   Jason Haines
• [Diy_efi] FJO DFI systems   Barry Tisdale
• [Diy_efi] Liquid Phase Propane Injectors   Greg Hermann
• [Diy_efi] WB free air calibration   bcroe at juno.com
• [Diy_efi] Liquid Phase Propane Injectors   Bobby Riggs
• [Diy_efi] TB velocity calculation   Perry Harrington
• [Diy_efi] Knock Detection using GM ESC Module   marko.cosic
• [Diy_efi] phillips xag49 engine management   Bernd Felsche
• [Diy_efi] Liquid Phase Propane Injectors   Mazda Ebrahimi
• [Diy_efi] 93 S10 2.8 wiring   W.J. Wilson
• [Diy_efi] phillips xag49 engine management   sk8er
• [Diy_efi] 93 S10 2.8 wiring   Dan Griffin
• [Diy_efi] looking for Vara Jection II manual   Nils Bansemir
• [Diy_efi] vette ECM bin   frank lupo
• [Diy_efi] FJO DFI systems   Raymond Brantley
• [Diy_efi] Liquid Phase Propane Injectors   Greg Hermann
• [Diy_efi] Cam duration & MAP sensors   W.J. Wilson
• [Diy_efi] RE: Ways to effectively use O2 sensor on motorcycle?   Neil.Poersch at mts.mb.ca
• [Diy_efi] Cam duration & MAP sensors   James Ridewood
• [Diy_efi] is this working..   David Gravereaux
• [Diy_efi] Info on how to make crank position sensor circuit?   David Gravereaux
• [Diy_efi] Cam duration & MAP sensors   William Shurvinton
• [Diy_efi] list archive for february?   David Gravereaux
• [Diy_efi] Use O2 sensor on motorcycle?   Garfield Willis
• [Diy_efi] Info on how to make crank position sensor circuit?   Tomas Sokorai Sch.
• [Diy_efi] Cam duration & MAP sensors   William Shurvinton
• [Diy_efi] Cam duration & MAP sensors   James Ridewood
• [Diy_efi] Info on how to make crank position sensor circuit?   bcroe at juno.com
• [Diy_efi] MAP sensor pinout   Tomas Sokorai Sch.
• [Diy_efi] Info on how to make crank position sensor circuit?   David Gravereaux
• [Diy_efi] Use O2 sensor on motorcycle?   Bruce
• [Diy_efi] Use O2 sensor on motorcycle?   bcroe at juno.com
• [Diy_efi] OT: Supercharger bypass valve location   Dan Zorde
• [Diy_efi] idle rpm adder with A/C active   Curtis Gulick
• [Diy_efi] vette ECM bin   Programmer
• [Diy_efi] Cam duration & MAP sensors   Programmer
• [Diy_efi] moderation   steve ravet
• [Diy_efi] idle rpm adder with A/C active   Bruce
• [Diy_efi] OT: Supercharger bypass valve location   Stephen Andersen
• [Diy_efi] Cam duration & MAP sensors   William Shurvinton
• [Diy_efi] Use O2 sensor on motorcycle?   Sven
• [Diy_efi] Use O2 sensor on motorcycle?   bcroe at juno.com
• [Diy_efi] Info on how to make crank position sensor circuit?   David Gravereaux
• [Diy_efi] vette ECM bin   frank lupo
• [Diy_efi] Re: OT: Supercharger bypass valve location   Dan Zorde
• [Diy_efi] Use O2 sensor on motorcycle?   David Gravereaux
• [Diy_efi] vette ECM bin   Bruce
• [Diy_efi] Info on how to make crank position sensor circuit?   bcroe at juno.com
• [Diy_efi] Use O2 sensor on motorcycle?   bcroe at juno.com
• [Diy_efi] Motronic ML4.1 disassembly ..   944Technologist
• [Diy_efi] megasquirt Group order # 2?   sean McMullen
• [Diy_efi] Use O2 sensor on motorcycle?   David Gravereaux
• [Diy_efi] OT - Events in London   Morten T Nielsen
• [Diy_efi] vette ECM bin   Programmer
• [Diy_efi] Info on how to make crank position sensor circuit?   Perry Harrington
• [Diy_efi] coolant temperature mod   Tom Cheung
• [Diy_efi] vette ECM bin   Programmer
• [Diy_efi] Info on how to make crank position sensor circuit?   David Gravereaux
• [Diy_efi] vette ECM bin   Perry Harrington
• [Diy_efi] My WB doesn't pass the test: The return...   renaud
• [Diy_efi] Emerald ECu   William Shurvinton
• [Diy_efi] Re: Use 02 sensor on motorcycle?   Sven
• [Diy_efi] coolant temperature mod   WEG1192 at aol.com
• [Diy_efi] Info on how to make crank position sensor circuit?   Tomas Sokorai Sch.
• [Diy_efi] coolant temperature mod   Bruce
• [Diy_efi] Info on how to make crank position sensor circuit?   Bruce
• [Diy_efi] coolant temperature mod   Tomas Sokorai Sch.
• [Diy_efi] Ignition Pickup   marko.cosic
• [Diy_efi] coolant temperature mod   Bruce
• [Diy_efi] fuel cut vs. ignition cut   rob files
• [Diy_efi] fuel cut vs. ignition cut   Bruce
• [Diy_efi] Ignition Pickup   Brian Dessent
• [Diy_efi] Use O2 sensor on motorcycle?   Brian Dessent
• [Diy_efi] you need to look at this   steve ravet
• [Diy_efi] you need to look at this   Matt
• [Diy_efi] megasquirt Group order # 2?   Kevin Wright (work)
• [Diy_efi] My WB doesn't pass the test: The return...   rr
• [Diy_efi] you need to look at this   Perry Harrington
• [Diy_efi] fuel cut vs. ignition cut   rob files
• [Diy_efi] you need to look at this   Brian Dessent
• [Diy_efi] Use 02 sensor on motorcycle?   bcroe at juno.com
• [Diy_efi] you need to look at this   Robert A. Ward Sr.
• [Diy_efi] you need to look at this   Bobby Riggs
• [Diy_efi] you need to look at this   Joe Piche
• [Diy_efi] you need to look at this   Brian Dessent
• [Diy_efi] Re: you need to look at this   J. Creech
• [Diy_efi] Re: you need to look at this   Jeremy Bertenshaw
• [Diy_efi] Re: you need to look at this   Perry Harrington
• [Diy_efi] Re: you need to look at this   J. Creech
• [Diy_efi] Ignition Pickup   marko.cosic
• [Diy_efi] Bogus message from me   Franc Buxton
• [Diy_efi] Ignition Pickup   Perry Harrington
• [Diy_efi] Ignition Pickup   marko.cosic
• [Diy_efi] Ignition Pickup   Perry Harrington
• [Diy_efi] Ignition Pickup   marko.cosic
• [Diy_efi] Ignition Pickup   Jeroen Cats
• [Diy_efi] Ignition Pickup   Perry Harrington
• [Diy_efi] Ignition Pickup   Perry Harrington
• [Diy_efi] Ignition Pickup   Perry Harrington
• [Diy_efi] Re: Bogus message from me   Franc Buxton
• [Diy_efi] Ignition Pickup   Bruce
• [Diy_efi] Ignition Pickup   marko.cosic
• [Diy_efi] Re: you need to look at this   Kevin Wright (work)
• [Diy_efi] Re: you need to look at this   Kevin Wright (work)
• [Diy_efi] Bogus message from me   Rich M
• [Diy_efi] Re: My WB doesn't pass the test: The return...   Renaud
• [Diy_efi] you need to look at this   Timothy J Cooper
• [Diy_efi] fuel cut vs. ignition cut   Mark Williams
• [Diy_efi] Bogus message from me   Programmer
• [Diy_efi] Ignition Pickup   Brian Dessent
• [Diy_efi] Freq change (was Ignition Pickup)   bcroe at juno.com
• [Diy_efi] Re: Bogus message from me   Gregory A. Parmer
• [Diy_efi] Accel Fuel Pump Dimensions?   Whit Hickman
• [Diy_efi] I NEED ONE...Megasquirt   pt telstra
• [Diy_efi] parts kit?   FetterKirk at aol.com
• [Diy_efi] I NEED ONE...Megasquirt   Perry Harrington
• AW: [Diy_efi] Accel Fuel Pump Dimensions?   Rausch, Bernd
• [Diy_efi] crank trigger   Henning Baldersheim
• [Diy_efi] parts kit?   rr
• [Diy_efi] High fuel pressure   944Technologist
• [Diy_efi] High fuel pressure   rr
• [Diy_efi] Accel/MSD Wiring   Mike Kelble
• [Diy_efi] High fuel pressure   Phil Hunter
• [Diy_efi] Re: My WB doesn't pass the test: The return...   Renaud
• [Diy_efi] injectors   joe graham
• [Diy_efi] DIY-WB PCB !   Maxim Alexeyev
• [Diy_efi] DIY-WB PCB !   Bruce
• [Diy_efi] DIY-WB PCB !   frank lupo
• [Diy_efi] (no subject)   frank lupo
• [Diy_efi] WB O2 system   Dennis Gearon
• [Diy_efi] Re: My WB doesn't pass the test: The return...   rr
• [Diy_efi] O2 Sensor voltage   frank lupo
• [Diy_efi] WB O2 system   Marteney, Steve
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] WB O2 system   Bernd Felsche
• [Diy_efi] (no subject)   romans, mark
• [Diy_efi] (no subject)   frank lupo
• [Diy_efi] (no subject)   romans, mark
• [Diy_efi] "Wet" Manifold Questions   Tom Sharpe
• [Diy_efi] injectors   Tom Sharpe
• [Diy_efi] DDIS on DIY-EFI Page   Matt Donohoe
• [Diy_efi] DDIS on DIY-EFI Page   bill.shurvinton at nokia.com
• [Diy_efi] unsubscribe   josh lane
• [Diy_efi] a/f ratio   elcamino73
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] Re: Parts for DIY-WB LED display   donald at vianet.net.au
• [Diy_efi] Geo Storm ECU revisited   Bobby Riggs
• [Diy_efi] finding maps   Brent Prindle
• [Diy_efi] OT, and probably an abuse of resources, but....   Jon V
• [Diy_efi] Geo Storm ECU revisited   justin ivan
• [Diy_efi] finding maps   Programmer
• [Diy_efi] finding maps   944Technologist
• [Diy_efi] Geo Storm ECU revisited   Bobby Riggs
• [Diy_efi] Re: My WB doesn't pass the test: The return...   Bobby Riggs
• [Diy_efi] finding maps   joe graham
• [Diy_efi] finding maps   Brent Prindle
• [Diy_efi] finding maps   Brian Sidebotham
• [Diy_efi] Geo Storm ECU revisited   Jorge Garcia
• [Diy_efi] operating 02 on 12volts   George Livanes
• [Diy_efi] Geo Storm ECU revisited   Erik Meisterman
• [Diy_efi] WB O2 system   Tom Sharpe
• [Diy_efi] WB O2 system   Dennis Gearon
• [Diy_efi] tiny injection   Santi Udomkesmalee
• [Diy_efi] tiny injection   MarkoNTL
• [Diy_efi] tiny injection   Brian Renegar
• [Diy_efi] operating 02 on 12volts   bcroe at juno.com
• [Diy_efi] operating 02 on 12volts   rr
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Perry Harrington
• [Diy_efi] Enlarging injectors   Grant Beaty
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] Standard O2 sensor and tuning   ingar
• [Diy_efi] MAF or MAP tpi?   ingar
• [Diy_efi] Re: My WB doesn't pass the test: The return...   renaud
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] WB O2 system   Stephen Andersen
• [Diy_efi] GM MAP sensor connections   WEG1192 at aol.com
• [Diy_efi] GM MAP sensor connections   AnalogWz at aol.com
• [Diy_efi] Basic Speed-Density equations?   AnalogWz at aol.com
• [Diy_efi] Standard O2 sensor and tuning   Garfield Willis
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] WB O2 system   Gregory A. Parmer
• [Diy_efi] Basic Speed-Density equations?   Eric Fahlgren
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] Bosch Air Flow Meter info please   AnalogWz at aol.com
• [Diy_efi] finding maps   Brent Prindle
• [Diy_efi] WB O2 system   Barry Tisdale
• [Diy_efi] Basic Speed-Density equations?   Brian Michalk
• [Diy_efi] Bad quality NTK sensor info   Henning Baldersheim
• [Diy_efi] OT: Tunning TDi engines, advice sought   TVS
• [Diy_efi] tcc lockup help needed   Dan Griffin
• [Diy_efi] WB O2 system   Bruce
• [Diy_efi] MAF or MAP tpi?   Doug Dayson
• [Diy_efi] Standard O2 sensor and tuning   bcroe at juno.com
• [Diy_efi] Motorola 68HC11   Matt Donohoe
• [Diy_efi] Help please, flex plate orienation, 1988 740 turbo   Chris Wilson
• [Diy_efi] Bosch Air Flow Meter info please   Bobby Riggs
• [Diy_efi] Basic Speed-Density equations?   Grant Beaty
• [Diy_efi] coolant temperature mod   Bobby Riggs
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   bcroe at juno.com
• [Diy_efi] Basic Speed-Density equations?   Perry Harrington
• [Diy_efi] Display for DIY-WB   renaud
• [Diy_efi] tcc lockup help needed   Bruce
• [Diy_efi] OT: Tunning TDi engines, advice sought   Shirley, Mark R
• [Diy_efi] Basic Speed-Density equations?   Bruce
• [Diy_efi] tcc lockup help needed   bill.shurvinton at nokia.com
• [Diy_efi] coolant temperature mod   Tom Cheung
• [Diy_efi] OT: Tunning TDi engines, advice sought   MarkoNTL
• [Diy_efi] OT: Tunning TDi engines, advice sought   TVS
• [Diy_efi] OT: Tunning TDi engines, advice sought   Lachlan Chapman
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Perry Harrington
• [Diy_efi] Basic Speed-Density equations?   Ron Schroeder
• [Diy_efi] Bad quality NTK sensor info   Bryan Zublin
• [Diy_efi] Looking for Holley carb   Marteney, Steve
• [Diy_efi] Basic Speed-Density equations?   Brian Michalk
• [Diy_efi] Basic Speed-Density equations?   Perry Harrington
• [Diy_efi] Basic Speed-Density equations?   Brian Michalk
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   bcroe at juno.com
• [Diy_efi] Re: Tunning TDi engines, advice sought   Stephan Helbig
• [Diy_efi] tcc lockup help needed   Bruce
• [Diy_efi] OT: Tunning TDi engines, advice sought   Ron Schroeder
• [Diy_efi] winbin help with Audi bin's   Antti Lehtonen
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   William Shurvinton
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Brian Dessent
• [Diy_efi] Re: OT: Tunning TDi Landies   Stephan Helbig
• [Diy_efi] winbin help with Audi bin's   ECMnut at aol.com
• [Diy_efi] Re: Tunning TDi engines, advice sought   Lachlan Chapman
• [Diy_efi] WBO2 Project   Lou Fourquet
• [Diy_efi] injector placement   john smith
• [Diy_efi] Display for DIY-WB   Tom Sharpe
• [Diy_efi] Basic Speed-Density equations?   socrace at ameritech.net
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   MarkoNTL
• [Diy_efi] test   john smith
• [Diy_efi] tiny injection   Eric Aos
• [Diy_efi] DIY-WBO2 O2 Heater-May be PTC   AnalogWz at aol.com
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   bcroe at juno.com
• [Diy_efi] WBO2 Project   bill.shurvinton at nokia.com
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Greg Hermann
• [Diy_efi] How do I unsubscribe   goonie.gordon at talk21.com
• [Diy_efi] Display for DIY-WB   van setten, tim at ACSSD
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] Basic Speed-Density equations?   Perry Harrington
• [Diy_efi] Looking for some help on a speed sensor project   Saxon, Howard (AFS-Warren)
• [Diy_efi] injector placement   bill.shurvinton at nokia.com
• [Diy_efi] Motorola 68HC11   Kent Martin
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   bill.shurvinton at nokia.com
• [Diy_efi] Standard O2 sensor and tuning   ingar
• [Diy_efi] WB O2 system   Tom Sharpe
• [Diy_efi] Looking for some help on a speed sensor project   AnalogWz at aol.com
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Tomas Sokorai Sch.
• [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)   Chad Clendening
• [Diy_efi] GN owners   Tom Sharpe
• [Diy_efi] Looking for some help on a speed sensor project   Perry Harrington
• [Diy_efi] Found the Speed-Density Equation   AnalogWz at aol.com
• [Diy_efi] some conversion   mester
• [Diy_efi] Basic Speed-Density equations?   B & I Baerg
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] MAF or MAP tpi?   ingar
• [Diy_efi] WB O2 system   Barry Tisdale
• [Diy_efi] Re: Tunning TDi engines, advice sought   TVS
• [Diy_efi] Looking for some help on a speed sensor project   Scott Campbell
• [Diy_efi] DIY WB as daily driver   Hugh Keir
• [Diy_efi] DIY WB as daily driver   bcroe at juno.com
• [Diy_efi] Looking for some help on a speed sensor project   Brian Dessent
• [Diy_efi] Motorola 68HC11   The Punisher
• [Diy_efi] WB O2 and Alternate Fuels   Garfield Willis
• [Diy_efi] injector placement   john smith
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   bcroe at juno.com
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Brian Dessent
• [Diy_efi] ECU test bench   Electronica Del Automovil
• [Diy_efi] tiny injection   Perry Harrington
• [Diy_efi] Basic Speed-Density equations?   Brian Michalk
• [Diy_efi] WB O2 system   Garfield Willis
• [Diy_efi] HOT daily driver   Garfield Willis
• [Diy_efi] Standard O2 sensor and tuning   Bruce
• [Diy_efi] tiny injection   bcroe at juno.com
• [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)   md4etal
• [Diy_efi] Motorola 68HC11   William Shurvinton
• [Diy_efi] injector placement   Greg Hermann
• [Diy_efi] WB O2 system   Tom Sharpe
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] WB O2 and Alternate Fuel   Hugh Keir
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Tomas Sokorai Sch.
• [Diy_efi] Looking for some help on a speed sensor project - a   Saxon, Howard (AFS-Warren)
• [Diy_efi] injector placement   Bruce
• [Diy_efi] Standard O2 sensor and tuning   Barry Tisdale
• [Diy_efi] injector placement   William Shurvinton
• [Diy_efi] What do you think about this?   Stephan Helbig
• [Diy_efi] coolant temperature mod   Bobby Riggs
• [Diy_efi] Zemco CompuCruise model 44   MarkoNTL
• [Diy_efi] DIY-WBO2 circuit improvement suggestion   Bernd Felsche
• [Diy_efi] Newby, Possible PC control?   BigBlock
• [Diy_efi] TBI selection question   mark
• [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)   Jorgen Karlsson
• [Diy_efi] injector placement   Dave Williams
• [Diy_efi] Line Lock   Crescent Kao
• [Diy_efi] DIY WB as daily driver   Brian Dessent
• [Diy_efi] HOT daily driver   Jorgen Karlsson
• [Diy_efi] Diesel - Propane   Lachlan Chapman
• [Diy_efi] Looking for some help on a speed sensor project - added   Brian Dessent
• [Diy_efi] T-Ram Bin Needed   Jonathan Revis
• [Diy_efi] Re: Line Lock   Dan Zorde
• [Diy_efi] HOT daily driver   Hugh Keir
• [Diy_efi] Diesel - Propane   mester
• [Diy_efi] T-Ram Bin Needed   r71chevy at earthlink.net
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] Diesel - Propane   Mazda Ebrahimi
• [Diy_efi] Newby, Possible PC control?   bcroe at juno.com
• [Diy_efi] DIY-WBO2 heater circuit   bcroe at juno.com
• [Diy_efi] DIY WB heater driver   bcroe at juno.com
• [Diy_efi] diy - wb help needed   Sam Ling
• [Diy_efi] T-Ram Bin Needed   Jonathan Revis
• [Diy_efi] What do you think about this?   Programmer
• [Diy_efi] Newby, Possible PC control?   Mark Williams (MWP)
• [Diy_efi] tiny injection   Santi Udomkesmalee
• [Diy_efi] tiny injection   Perry Harrington
• [Diy_efi] tiny injection   MarkoNTL
• [Diy_efi] Looking for some help on a speed sensor project - a   Saxon, Howard (AFS-Warren)
• [Diy_efi] Newby, Possible PC control?   Shaun Wilson (FDN)
• [Diy_efi] diy - wb help needed   rr
• [Diy_efi] AW: What do you think about this?   Jens Knickmeyer
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] injector placement   bill.shurvinton at nokia.com
• [Diy_efi] MegaSquirt, Did I miss the Buy?   BigBlock
• [Diy_efi] Looking for some help on a speed sensor project - added   Brian Dessent
• [Diy_efi] Intercooled question   Brian Dessent
• [Diy_efi] T-Ram Bin Needed   r71chevy at earthlink.net
• [Diy_efi] injector placement   Greg Hermann
• [Diy_efi] injector placement   The Punisher
• [Diy_efi] easy resistor color reader   elcamino73
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   md4etal
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   Bernd Felsche
• [Diy_efi] T-Ram Bin Needed   Shannen Durphey
• [Diy_efi] T-Ram Bin Needed   Jonathan Revis
• [Diy_efi] T-Ram Bin Needed   Jonathan Revis
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] T-Ram Bin Needed   Shannen Durphey
• [Diy_efi] T-Ram Bin Needed   Doug Dayson
• [Diy_efi] T-Ram Bin Needed   Doug Dayson
• [Diy_efi] tiny injection   Santi Udomkesmalee
• [Diy_efi] tiny injection   Marc Reibel
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   md4etal
• [Diy_efi] easy resistor color reader   944Technologist
• [Diy_efi] Re: "Mr.Ed" Programme   Stephan Helbig
• [Diy_efi] tiny injection   Brian Dessent
• [Diy_efi] Intercooled question   Brian Dessent
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] Newbie, Rechipping Question   Aaron Thorp
• [Diy_efi] Intercooled question   Ron Schroeder
• [Diy_efi] injector placement   Ron Schroeder
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   Jay Wallace
• [Diy_efi] Intercooled question   Barry Tisdale
• [Diy_efi] Intercooled question   Brian Michalk
• [Diy_efi] injector placement   bill.shurvinton at nokia.com
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   Bevan Weiss
• [Diy_efi] injector placement   The Punisher
• [Diy_efi] DIY-WBO2 circuit now ceramic effects   Jay Wallace
• [Diy_efi] DIY-WB wiring   renaud
• [Diy_efi] wide band   Speeds96 at aol.com
• [Diy_efi] Question From Electromotive Inc.   Russell Turner
• [Diy_efi] injector placement   MarkoNTL
• [Diy_efi] injector placement   Tom Sharpe
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] tiny injection   elcamino73
• [Diy_efi] T-Ram Bin Needed   Programmer
• [Diy_efi] Intercooled question   Programmer
• [Diy_efi] DIY-WB wiring   rr
• [Diy_efi] T-Ram Bin Needed   Shannen Durphey
• [Diy_efi] DIY-WB wiring   Steve Wong
• [Diy_efi] Where is the best place to weld a WB bung on 5.0 exhaust?   TROYXTROY
• [Diy_efi] Bosch LE2 Jetronic   Bill Washington
• [Diy_efi] injector placement   Ron Schroeder
• [Diy_efi] injector placement   Ron Schroeder
• [Diy_efi] Intercooled question   Ron Schroeder
• [Diy_efi] Intercooled question   Ron Schroeder
• [Diy_efi] RE: Diy_efi digest, Vol 1 #125 - 17 msgs   Shirley, Mark R
• [Diy_efi] (no subject)   Russell Turner
• [Diy_efi] Intercooled question   rr
• [Diy_efi] (no subject)   Bruce
• [Diy_efi] tiny injection   Tom Sharpe
• [Diy_efi] tiny injection   Marc Reviel
• [Diy_efi] Intercooled question   Programmer
• [Diy_efi] tiny injection   Stephen Andersen
• [Diy_efi] Intercooled question   Eck, Joel
• [Diy_efi] TBI on an Olds 403   Olle Wilson
• [Diy_efi] Intercooled question   Bruce
• [Diy_efi] tiny injection   Marc Reviel
• [Diy_efi] RE: Intercooled question (now AC advocacy)   Shirley, Mark R
• [Diy_efi] tiny injection   Stephen Andersen
• [Diy_efi] Help wanted.   Tom Sharpe
• [Diy_efi] tiny injection   Marc Reviel
• [Diy_efi] Help wanted.   Bruce
• [Diy_efi] Intercooled question   Ron Schroeder
• [Diy_efi] Intercooled question   Brian Renegar
• [Diy_efi] Intercooled question   MarkoNTL
• [Diy_efi] Intercooled question   Bruce
• [Diy_efi] tiny injection   Stephen Andersen
• [Diy_efi] Intercooled question   Greg Hermann
• [Diy_efi] tiny injection   Marc Reviel
• [Diy_efi] RE: Intercooled question (now AC advocacy)   Programmer
• [Diy_efi] Where is the best place to weld a WB bung on 5.0 exhaust?   TROYXTROY
• [Diy_efi] Where is the best place to weld a WB bung on 5.0   Brian Renegar
• [Diy_efi] Intercooled question   Ron Schroeder
• [Diy_efi] R-12 & R-134a Trivia   AnalogWz at aol.com
• [Diy_efi] Help wanted.   Programmer
• [Diy_efi] Dead O2 sensor values   Kris Sundell
• [Diy_efi] Intercooled question   Brian Dessent
• [Diy_efi] Re: Diy_efi digest, Vol 1 #127 - 4 msgs   jsmith at ausb.com
• [Diy_efi] Re: Diy_efi digest, Vol 1 #126 - 14 msgs   jsmith at ausb.com
• [Diy_efi] Dead O2 sensor values   Bruce
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Matthew McCain
• [Diy_efi] Dead O2 sensor values   Bernd Felsche
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Mazda Ebrahimi
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Perry Harrington
• [Diy_efi] Intercooled question   Bruce
• [Diy_efi] R-12 & R-134a Trivia   95_HMCS
• [Diy_efi] RE: More A/C trivia   Shirley, Mark R
• [Diy_efi] R-12 & R-134a Trivia   AnalogWz at aol.com
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   AnalogWz at aol.com
• [Diy_efi] Re: Diy_efi digest, Vol 1 #127 - 4 msgs   Tom Sharpe
• [Diy_efi] RE: More A/C trivia   AnalogWz at aol.com
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Tom Sharpe
• [Diy_efi] RE: More A/C trivia   Greg Hermann
• [Diy_efi] R-12 & R-134a Trivia   Greg Hermann
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Programmer
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   Eck, Joel
• [Diy_efi] injector placement   Steve Spiers
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] Aaron A Pfadt/PTPE/DCC/DCX is out of the office.   aap14 at daimlerchrysler.com
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] R-12 & R-134a Trivia   elcamino73
• [Diy_efi] tiny injection   elcamino73
• [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected   mike beebe
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] tiny injection   elcamino73
• [Diy_efi] Moving the CalR on the PCB   renaud
• [Diy_efi] mitsibishi micro as efi controller   Kent Martin
• [Diy_efi] Where is the best place to weld a WB bung on 5.0   Renaud
• [Diy_efi] Dead O2 sensor values   kwsundell
• [Diy_efi] Dead O2 sensor values   Garfield Willis
• [Diy_efi] Nitrous Injection system   Hugh Keir
• [Diy_efi] Dead O2 sensor values   Bruce
• [Diy_efi] Where is the best place to weld a WB bung on 5.0   Brian Renegar
• [Diy_efi] Dead O2 sensor values   AnalogWz at aol.com
• [Diy_efi] Poor earth toasting ECU?   MarkoNTL
• [Diy_efi] Poor earth toasting ECU?   AnalogWz at aol.com
• DIY telemetry ... Re: [Diy_efi] tiny injection   Santi Udomkesmalee
• [Diy_efi] tiny injection   The Punisher
• DIY telemetry ... Re: [Diy_efi] tiny injection   The Punisher
• [Diy_efi] Re: DIY telemetry ...   Sean Olson
• DIY telemetry ... Re: [Diy_efi] tiny injection   Kenny W
• [Diy_efi] Re: DIY telemetry ...   Kenny W
• DIY telemetry ... Re: [Diy_efi] tiny injection   Jon V
• [Diy_efi] Intercooled question   Programmer
• [Diy_efi] Moving the CalR on the PCB   rr
• [Diy_efi] Poor earth toasting ECU?   MarkoNTL
• [Diy_efi] tiny injection   Shannen Durphey
• [Diy_efi] Re: DIY telemetry ...   Bernd Felsche
• [Diy_efi] was tiny inj: now supercharger   elcamino73
• [Diy_efi] Intercooled question   elcamino73
• [Diy_efi] Re: DIY telemetry ...   Sean Olson
• [Diy_efi] was tiny inj: now supercharger   Bruce
• [Diy_efi] tiny injection   elcamino73
• [Diy_efi] was tiny inj: now supercharger   elcamino73
• [Diy_efi] Re: [IDiy_efi] was tiny inj: now supercharger   elcamino73
• [Diy_efi] was tiny inj: now supercharger   The Punisher
• [Diy_efi] tiny injection   The Punisher
• [Diy_efi] was tiny inj: now supercharger   elcamino73
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Which ECM?   elcamino73
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Which ECM?   elcamino73
• [Diy_efi] Which ECM?- Coolant temp   AnalogWz at aol.com
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] was tiny inj: now supercharger   The Punisher
• [Diy_efi] Which ECM?   Bruce
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Which ECM?   Bruce
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Which ECM?   Bruce
• [Diy_efi] Gauge/Sensor accuracy?   EFI Dude
• [Diy_efi] Which ECM?   Highhat
• [Diy_efi] Gauge/Sensor accuracy?   Bruce
• [Diy_efi] Gauge/Sensor accuracy?   Perry Harrington
• [Diy_efi] Gauge/Sensor accuracy?   Perry Harrington
• [Diy_efi] RE fiero ecm #s   Dave Mitchell
• [Diy_efi] RE fiero ecm #s   Highhat
• [Diy_efi] mitsibishi micro as efi controller   Tony Bryant
• [Diy_efi] Gauge/Sensor accuracy?   EFI Dude
• [Diy_efi] Gauge/Sensor accuracy?   EFI Dude
• [Diy_efi] Intercooled question   Programmer

Last message date: Sun Jun 30 15:29:46 GMT 2002
Archived on: Thu May 30 06:02:37 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...