[Diy_efi] Where is the best place to weld a WB bung on 5.0
Brian Renegar
thomas.renegar at nist.gov
Wed Jun 26 20:28:20 GMT 2002
--=====================_-472902979==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
I'm going to weld mine into the passenger side tube near the stock O2
sensor. I'm using the passenger side simply because that is where all of
my data logging hardware will reside, and I want to make it as simple as
possible with wire lengths as short as possible. Look around for a
convenient location near the stock sensor, that is not in the way of
anything. Also, they do recommend to mount it so that the sensor tip is
pointed down (opposite of the stock sensors). This is to keep any moisture
from accumulating in the sensor.
Brian
>Anyone?
>I can never find anything in those archives.
>-Troy
>----- Original Message -----
From: <mailto:TROYXTROY at cox.net>TROYXTROY
>To: <mailto:diy_efi at diy-efi.org>DIY-EFI
>Sent: Tuesday, June 25, 2002 11:20 PM
>Subject: [Diy_efi] Where is the best place to weld a WB bung on 5.0 exhaust?
>
>Where is the best place to weld a WB bung on a 5.0 exhaust? Driver or
>passenger side? Should the placement be approx. around the oxygen sensor?
>
>thanks
>
>-Troy
--=====================_-472902979==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
I'm going to weld mine into the passenger side tube near the stock O2
sensor. I'm using the passenger side simply because that is where
all of my data logging hardware will reside, and I want to make it as
simple as possible with wire lengths as short as possible. Look
around for a convenient location near the stock sensor, that is not in
the way of anything. Also, they do recommend to mount it so that
the sensor tip is pointed down (opposite of the stock sensors).
This is to keep any moisture from accumulating in the sensor.<br>
<br>
Brian<br>
<br>
<br>
<blockquote type=cite class=cite cite><font face="arial" size=2 color="#000080">Anyone?</font><br>
<font face="arial" size=2 color="#000080">I can never find anything in
those archives.</font><br>
<font face="arial" size=2 color="#000080">-Troy</font>
<dl>
<dd>----- Original Message -----
<dd>From:</b> <a href="mailto:TROYXTROY at cox.net">TROYXTROY</a>
<dd>To:</b> <a href="mailto:diy_efi at diy-efi.org">DIY-EFI</a>
<dd>Sent:</b> Tuesday, June 25, 2002 11:20 PM
<dd>Subject:</b> [Diy_efi] Where is the best place to weld a WB bung on
5.0 exhaust?<br>
<br>
<font face="arial" size=2 color="#000080">
<dd>Where is the best place to weld a WB bung on a 5.0 exhaust?
Driver or passenger side? Should the placement be approx. around
the oxygen sensor?<br>
<br>
<dd>thanks<br>
<br>
<dd>-Troy</font>
</dl></blockquote></html>
--=====================_-472902979==_.ALT--
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list