June 2002 Archives by subject
Starting: Sat Jun 1 21:42:01 GMT 2002
Ending: Sun Jun 30 15:29:46 GMT 2002
Messages: 499
- [Diy_efi] Re: "Mr.Ed" Programme
Stephan Helbig
- [Diy_efi] "Wet" Manifold Questions
Tom Sharpe
- [Diy_efi] (no subject)
frank lupo
- [Diy_efi] (no subject)
romans, mark
- [Diy_efi] (no subject)
frank lupo
- [Diy_efi] (no subject)
romans, mark
- [Diy_efi] (no subject)
Russell Turner
- [Diy_efi] (no subject)
Bruce
- [Diy_efi] 93 S10 2.8 wiring
W.J. Wilson
- [Diy_efi] 93 S10 2.8 wiring
Dan Griffin
- [Diy_efi] Re: [IDiy_efi] was tiny inj: now supercharger
elcamino73
- [Diy_efi] a/f ratio
elcamino73
- [Diy_efi] Aaron A Pfadt/PTPE/DCC/DCX is out of the office.
aap14 at daimlerchrysler.com
- [Diy_efi] Accel Fuel Pump Dimensions?
Whit Hickman
- AW: [Diy_efi] Accel Fuel Pump Dimensions?
Rausch, Bernd
- [Diy_efi] Accel/MSD Wiring
Mike Kelble
- [Diy_efi] Bad quality NTK sensor info
Henning Baldersheim
- [Diy_efi] Bad quality NTK sensor info
Bryan Zublin
- [Diy_efi] Basic Speed-Density equations?
AnalogWz at aol.com
- [Diy_efi] Basic Speed-Density equations?
Eric Fahlgren
- [Diy_efi] Basic Speed-Density equations?
Brian Michalk
- [Diy_efi] Basic Speed-Density equations?
Grant Beaty
- [Diy_efi] Basic Speed-Density equations?
Perry Harrington
- [Diy_efi] Basic Speed-Density equations?
Bruce
- [Diy_efi] Basic Speed-Density equations?
Ron Schroeder
- [Diy_efi] Basic Speed-Density equations?
Brian Michalk
- [Diy_efi] Basic Speed-Density equations?
Perry Harrington
- [Diy_efi] Basic Speed-Density equations?
Brian Michalk
- [Diy_efi] Basic Speed-Density equations?
socrace at ameritech.net
- [Diy_efi] Basic Speed-Density equations?
Perry Harrington
- [Diy_efi] Basic Speed-Density equations?
B & I Baerg
- [Diy_efi] Basic Speed-Density equations?
Brian Michalk
- [Diy_efi] Bogus message from me
Franc Buxton
- [Diy_efi] Re: Bogus message from me
Franc Buxton
- [Diy_efi] Bogus message from me
Rich M
- [Diy_efi] Bogus message from me
Programmer
- [Diy_efi] Re: Bogus message from me
Gregory A. Parmer
- [Diy_efi] Bosch Air Flow Meter info please
AnalogWz at aol.com
- [Diy_efi] Bosch Air Flow Meter info please
Bobby Riggs
- [Diy_efi] Bosch LE2 Jetronic
Bill Washington
- [Diy_efi] Cam duration & MAP sensors
W.J. Wilson
- [Diy_efi] Cam duration & MAP sensors
James Ridewood
- [Diy_efi] Cam duration & MAP sensors
William Shurvinton
- [Diy_efi] Cam duration & MAP sensors
William Shurvinton
- [Diy_efi] Cam duration & MAP sensors
James Ridewood
- [Diy_efi] Cam duration & MAP sensors
Programmer
- [Diy_efi] Cam duration & MAP sensors
William Shurvinton
- [Diy_efi] coolant temperature mod
Tom Cheung
- [Diy_efi] coolant temperature mod
WEG1192 at aol.com
- [Diy_efi] coolant temperature mod
Bruce
- [Diy_efi] coolant temperature mod
Tomas Sokorai Sch.
- [Diy_efi] coolant temperature mod
Bruce
- [Diy_efi] coolant temperature mod
Bobby Riggs
- [Diy_efi] coolant temperature mod
Tom Cheung
- [Diy_efi] coolant temperature mod
Bobby Riggs
- [Diy_efi] crank trigger
Henning Baldersheim
- [Diy_efi] DDIS on DIY-EFI Page
Matt Donohoe
- [Diy_efi] DDIS on DIY-EFI Page
bill.shurvinton at nokia.com
- [Diy_efi] Dead O2 sensor values
Kris Sundell
- [Diy_efi] Dead O2 sensor values
Bruce
- [Diy_efi] Dead O2 sensor values
Bernd Felsche
- [Diy_efi] Dead O2 sensor values
kwsundell
- [Diy_efi] Dead O2 sensor values
Garfield Willis
- [Diy_efi] Dead O2 sensor values
Bruce
- [Diy_efi] Dead O2 sensor values
AnalogWz at aol.com
- [Diy_efi] Diesel - Propane
Lachlan Chapman
- [Diy_efi] Diesel - Propane
mester
- [Diy_efi] Diesel - Propane
Mazda Ebrahimi
- [Diy_efi] Display for DIY-WB
renaud
- [Diy_efi] Display for DIY-WB
Tom Sharpe
- [Diy_efi] Display for DIY-WB
van setten, tim at ACSSD
- [Diy_efi] diy - wb help needed
Sam Ling
- [Diy_efi] diy - wb help needed
rr
- [Diy_efi] Re: DIY telemetry ...
Sean Olson
- [Diy_efi] Re: DIY telemetry ...
Kenny W
- [Diy_efi] Re: DIY telemetry ...
Bernd Felsche
- [Diy_efi] Re: DIY telemetry ...
Sean Olson
- DIY telemetry ... Re: [Diy_efi] tiny injection
Santi Udomkesmalee
- DIY telemetry ... Re: [Diy_efi] tiny injection
The Punisher
- DIY telemetry ... Re: [Diy_efi] tiny injection
Kenny W
- DIY telemetry ... Re: [Diy_efi] tiny injection
Jon V
- [Diy_efi] DIY WB as daily driver
Hugh Keir
- [Diy_efi] DIY WB as daily driver
bcroe at juno.com
- [Diy_efi] DIY WB as daily driver
Brian Dessent
- [Diy_efi] DIY WB heater driver
bcroe at juno.com
- [Diy_efi] DIY-WB PCB !
Maxim Alexeyev
- [Diy_efi] DIY-WB PCB !
Bruce
- [Diy_efi] DIY-WB PCB !
frank lupo
- [Diy_efi] DIY-WB wiring
renaud
- [Diy_efi] DIY-WB wiring
rr
- [Diy_efi] DIY-WB wiring
Steve Wong
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Perry Harrington
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
bcroe at juno.com
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Perry Harrington
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
bcroe at juno.com
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
William Shurvinton
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Brian Dessent
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
MarkoNTL
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
bcroe at juno.com
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Greg Hermann
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
bill.shurvinton at nokia.com
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Tomas Sokorai Sch.
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
bcroe at juno.com
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Brian Dessent
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Tomas Sokorai Sch.
- [Diy_efi] DIY-WBO2 circuit improvement suggestion
Bernd Felsche
- [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)
Chad Clendening
- [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)
md4etal
- [Diy_efi] DIY-WBO2 circuit improvement suggestion (Greg Hermann)
Jorgen Karlsson
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
md4etal
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
Bernd Felsche
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
md4etal
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
Jay Wallace
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
Bevan Weiss
- [Diy_efi] DIY-WBO2 circuit now ceramic effects
Jay Wallace
- [Diy_efi] DIY-WBO2 heater circuit
bcroe at juno.com
- [Diy_efi] DIY-WBO2 O2 Heater-May be PTC
AnalogWz at aol.com
- [Diy_efi] RE: Diy_efi digest, Vol 1 #125 - 17 msgs
Shirley, Mark R
- [Diy_efi] Re: Diy_efi digest, Vol 1 #126 - 14 msgs
jsmith at ausb.com
- [Diy_efi] Re: Diy_efi digest, Vol 1 #127 - 4 msgs
jsmith at ausb.com
- [Diy_efi] Re: Diy_efi digest, Vol 1 #127 - 4 msgs
Tom Sharpe
- [Diy_efi] easy resistor color reader
elcamino73
- [Diy_efi] easy resistor color reader
944Technologist
- [Diy_efi] ECU test bench
Electronica Del Automovil
- [Diy_efi] Emerald ECu
William Shurvinton
- [Diy_efi] Enlarging injectors
Grant Beaty
- [Diy_efi] finding maps
Brent Prindle
- [Diy_efi] finding maps
Programmer
- [Diy_efi] finding maps
944Technologist
- [Diy_efi] finding maps
joe graham
- [Diy_efi] finding maps
Brent Prindle
- [Diy_efi] finding maps
Brian Sidebotham
- [Diy_efi] finding maps
Brent Prindle
- [Diy_efi] FJO DFI systems
Barry Tisdale
- [Diy_efi] FJO DFI systems
Raymond Brantley
- [Diy_efi] Found the Speed-Density Equation
AnalogWz at aol.com
- [Diy_efi] Freq change (was Ignition Pickup)
bcroe at juno.com
- [Diy_efi] fuel cut vs. ignition cut
rob files
- [Diy_efi] fuel cut vs. ignition cut
Bruce
- [Diy_efi] fuel cut vs. ignition cut
rob files
- [Diy_efi] fuel cut vs. ignition cut
Mark Williams
- [Diy_efi] Gauge/Sensor accuracy?
EFI Dude
- [Diy_efi] Gauge/Sensor accuracy?
Bruce
- [Diy_efi] Gauge/Sensor accuracy?
Perry Harrington
- [Diy_efi] Gauge/Sensor accuracy?
Perry Harrington
- [Diy_efi] Gauge/Sensor accuracy?
EFI Dude
- [Diy_efi] Gauge/Sensor accuracy?
EFI Dude
- [Diy_efi] Geo Storm ECU revisited
Bobby Riggs
- [Diy_efi] Geo Storm ECU revisited
justin ivan
- [Diy_efi] Geo Storm ECU revisited
Bobby Riggs
- [Diy_efi] Geo Storm ECU revisited
Jorge Garcia
- [Diy_efi] Geo Storm ECU revisited
Erik Meisterman
- [Diy_efi] GM MAP sensor connections
WEG1192 at aol.com
- [Diy_efi] GM MAP sensor connections
AnalogWz at aol.com
- [Diy_efi] GN owners
Tom Sharpe
- [Diy_efi] Help please, flex plate orienation, 1988 740 turbo
Chris Wilson
- [Diy_efi] Help wanted.
Tom Sharpe
- [Diy_efi] Help wanted.
Bruce
- [Diy_efi] Help wanted.
Programmer
- [Diy_efi] High fuel pressure
944Technologist
- [Diy_efi] High fuel pressure
rr
- [Diy_efi] High fuel pressure
Phil Hunter
- [Diy_efi] HOT daily driver
Garfield Willis
- [Diy_efi] HOT daily driver
Jorgen Karlsson
- [Diy_efi] HOT daily driver
Hugh Keir
- [Diy_efi] How do I unsubscribe
goonie.gordon at talk21.com
- [Diy_efi] I NEED ONE...Megasquirt
pt telstra
- [Diy_efi] I NEED ONE...Megasquirt
Perry Harrington
- [Diy_efi] idle rpm adder with A/C active
Curtis Gulick
- [Diy_efi] idle rpm adder with A/C active
Bruce
- [Diy_efi] Ignition Pickup
marko.cosic
- [Diy_efi] Ignition Pickup
Brian Dessent
- [Diy_efi] Ignition Pickup
marko.cosic
- [Diy_efi] Ignition Pickup
Perry Harrington
- [Diy_efi] Ignition Pickup
marko.cosic
- [Diy_efi] Ignition Pickup
Perry Harrington
- [Diy_efi] Ignition Pickup
marko.cosic
- [Diy_efi] Ignition Pickup
Jeroen Cats
- [Diy_efi] Ignition Pickup
Perry Harrington
- [Diy_efi] Ignition Pickup
Perry Harrington
- [Diy_efi] Ignition Pickup
Perry Harrington
- [Diy_efi] Ignition Pickup
Bruce
- [Diy_efi] Ignition Pickup
marko.cosic
- [Diy_efi] Ignition Pickup
Brian Dessent
- [Diy_efi] Info on how to make crank position sensor circuit?
David Gravereaux
- [Diy_efi] Info on how to make crank position sensor circuit?
Tomas Sokorai Sch.
- [Diy_efi] Info on how to make crank position sensor circuit?
bcroe at juno.com
- [Diy_efi] Info on how to make crank position sensor circuit?
David Gravereaux
- [Diy_efi] Info on how to make crank position sensor circuit?
David Gravereaux
- [Diy_efi] Info on how to make crank position sensor circuit?
bcroe at juno.com
- [Diy_efi] Info on how to make crank position sensor circuit?
Perry Harrington
- [Diy_efi] Info on how to make crank position sensor circuit?
David Gravereaux
- [Diy_efi] Info on how to make crank position sensor circuit?
Tomas Sokorai Sch.
- [Diy_efi] Info on how to make crank position sensor circuit?
Bruce
- [Diy_efi] injector placement
john smith
- [Diy_efi] injector placement
bill.shurvinton at nokia.com
- [Diy_efi] injector placement
john smith
- [Diy_efi] injector placement
Greg Hermann
- [Diy_efi] injector placement
Bruce
- [Diy_efi] injector placement
William Shurvinton
- [Diy_efi] injector placement
Dave Williams
- [Diy_efi] injector placement
bill.shurvinton at nokia.com
- [Diy_efi] injector placement
Greg Hermann
- [Diy_efi] injector placement
The Punisher
- [Diy_efi] injector placement
Ron Schroeder
- [Diy_efi] injector placement
bill.shurvinton at nokia.com
- [Diy_efi] injector placement
The Punisher
- [Diy_efi] injector placement
MarkoNTL
- [Diy_efi] injector placement
Tom Sharpe
- [Diy_efi] injector placement
Ron Schroeder
- [Diy_efi] injector placement
Ron Schroeder
- [Diy_efi] injector placement
Steve Spiers
- [Diy_efi] injectors
joe graham
- [Diy_efi] injectors
Tom Sharpe
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Brian Dessent
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Brian Dessent
- [Diy_efi] Intercooled question
Ron Schroeder
- [Diy_efi] Intercooled question
Barry Tisdale
- [Diy_efi] Intercooled question
Brian Michalk
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Programmer
- [Diy_efi] Intercooled question
Ron Schroeder
- [Diy_efi] Intercooled question
Ron Schroeder
- [Diy_efi] Intercooled question
rr
- [Diy_efi] Intercooled question
Programmer
- [Diy_efi] Intercooled question
Eck, Joel
- [Diy_efi] Intercooled question
Bruce
- [Diy_efi] Intercooled question
Ron Schroeder
- [Diy_efi] Intercooled question
Brian Renegar
- [Diy_efi] Intercooled question
MarkoNTL
- [Diy_efi] Intercooled question
Bruce
- [Diy_efi] Intercooled question
Greg Hermann
- [Diy_efi] Intercooled question
Ron Schroeder
- [Diy_efi] Intercooled question
Brian Dessent
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Bruce
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Programmer
- [Diy_efi] Intercooled question
elcamino73
- [Diy_efi] Intercooled question
Programmer
- [Diy_efi] RE: Intercooled question (now AC advocacy)
Shirley, Mark R
- [Diy_efi] RE: Intercooled question (now AC advocacy)
Programmer
- [Diy_efi] is this working..
David Gravereaux
- [Diy_efi] Knock Detection using GM ESC Module
Bobby Riggs
- [Diy_efi] Knock Detection using GM ESC Module
marko.cosic
- [Diy_efi] Line Lock
Crescent Kao
- [Diy_efi] Re: Line Lock
Dan Zorde
- [Diy_efi] Liquid Phase Propane Injectors
Greg Hermann
- [Diy_efi] Liquid Phase Propane Injectors
Bobby Riggs
- [Diy_efi] Liquid Phase Propane Injectors
Mazda Ebrahimi
- [Diy_efi] Liquid Phase Propane Injectors
Greg Hermann
- [Diy_efi] list archive for february?
David Gravereaux
- [Diy_efi] Looking for Holley carb
Marteney, Steve
- [Diy_efi] Looking for some help on a speed sensor project
Saxon, Howard (AFS-Warren)
- [Diy_efi] Looking for some help on a speed sensor project
AnalogWz at aol.com
- [Diy_efi] Looking for some help on a speed sensor project
Perry Harrington
- [Diy_efi] Looking for some help on a speed sensor project
Scott Campbell
- [Diy_efi] Looking for some help on a speed sensor project
Brian Dessent
- [Diy_efi] Looking for some help on a speed sensor project - a
Saxon, Howard (AFS-Warren)
- [Diy_efi] Looking for some help on a speed sensor project - a
Saxon, Howard (AFS-Warren)
- [Diy_efi] Looking for some help on a speed sensor project - added
Brian Dessent
- [Diy_efi] Looking for some help on a speed sensor project - added
Brian Dessent
- [Diy_efi] looking for Vara Jection II manual
Nils Bansemir
- [Diy_efi] MAF or MAP tpi?
ingar
- [Diy_efi] MAF or MAP tpi?
Doug Dayson
- [Diy_efi] MAF or MAP tpi?
ingar
- [Diy_efi] MAP sensor pinout
Tomas Sokorai Sch.
- [Diy_efi] MEFI ECM, LT1 PCMs, Hypertech chips, stock chips, programmer on ebay
Jason Haines
- [Diy_efi] megasquirt Group order # 2?
sean McMullen
- [Diy_efi] megasquirt Group order # 2?
Kevin Wright (work)
- [Diy_efi] MegaSquirt, Did I miss the Buy?
BigBlock
- [Diy_efi] mitsibishi micro as efi controller
Kent Martin
- [Diy_efi] mitsibishi micro as efi controller
Tony Bryant
- [Diy_efi] moderation
steve ravet
- [Diy_efi] RE: More A/C trivia
Shirley, Mark R
- [Diy_efi] RE: More A/C trivia
AnalogWz at aol.com
- [Diy_efi] RE: More A/C trivia
Greg Hermann
- [Diy_efi] Motorola 68HC11
Matt Donohoe
- [Diy_efi] Motorola 68HC11
Kent Martin
- [Diy_efi] Motorola 68HC11
The Punisher
- [Diy_efi] Motorola 68HC11
William Shurvinton
- [Diy_efi] Motronic ML4.1 disassembly ..
944Technologist
- [Diy_efi] Moving the CalR on the PCB
renaud
- [Diy_efi] Moving the CalR on the PCB
rr
- [Diy_efi] My WB doesn't pass the test: The return...
renaud
- [Diy_efi] My WB doesn't pass the test: The return...
rr
- [Diy_efi] Re: My WB doesn't pass the test: The return...
Renaud
- [Diy_efi] Re: My WB doesn't pass the test: The return...
Renaud
- [Diy_efi] Re: My WB doesn't pass the test: The return...
rr
- [Diy_efi] Re: My WB doesn't pass the test: The return...
Bobby Riggs
- [Diy_efi] Re: My WB doesn't pass the test: The return...
renaud
- [Diy_efi] Newbie, Rechipping Question
Aaron Thorp
- [Diy_efi] Newby, Possible PC control?
BigBlock
- [Diy_efi] Newby, Possible PC control?
bcroe at juno.com
- [Diy_efi] Newby, Possible PC control?
Mark Williams (MWP)
- [Diy_efi] Newby, Possible PC control?
Shaun Wilson (FDN)
- [Diy_efi] Nitrous Injection system
Hugh Keir
- [Diy_efi] O2 Sensor voltage
frank lupo
- [Diy_efi] operating 02 on 12volts
George Livanes
- [Diy_efi] operating 02 on 12volts
bcroe at juno.com
- [Diy_efi] operating 02 on 12volts
rr
- [Diy_efi] OT - Events in London
Morten T Nielsen
- [Diy_efi] OT, and probably an abuse of resources, but....
Jon V
- [Diy_efi] OT: Supercharger bypass valve location
Dan Zorde
- [Diy_efi] OT: Supercharger bypass valve location
Stephen Andersen
- [Diy_efi] Re: OT: Supercharger bypass valve location
Dan Zorde
- [Diy_efi] OT: Tunning TDi engines, advice sought
TVS
- [Diy_efi] OT: Tunning TDi engines, advice sought
Shirley, Mark R
- [Diy_efi] OT: Tunning TDi engines, advice sought
MarkoNTL
- [Diy_efi] OT: Tunning TDi engines, advice sought
TVS
- [Diy_efi] OT: Tunning TDi engines, advice sought
Lachlan Chapman
- [Diy_efi] OT: Tunning TDi engines, advice sought
Ron Schroeder
- [Diy_efi] Re: OT: Tunning TDi Landies
Stephan Helbig
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Matthew McCain
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Mazda Ebrahimi
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Perry Harrington
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
AnalogWz at aol.com
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Tom Sharpe
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Programmer
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
Eck, Joel
- [Diy_efi] P0300 Random/Multiple Cylinder Missfire Detected
mike beebe
- [Diy_efi] Re: Parts for DIY-WB LED display
donald at vianet.net.au
- [Diy_efi] parts kit?
FetterKirk at aol.com
- [Diy_efi] parts kit?
rr
- [Diy_efi] phillips xag49 engine management
Kent Martin
- [Diy_efi] phillips xag49 engine management
Bernd Felsche
- [Diy_efi] phillips xag49 engine management
sk8er
- [Diy_efi] Poor earth toasting ECU?
MarkoNTL
- [Diy_efi] Poor earth toasting ECU?
AnalogWz at aol.com
- [Diy_efi] Poor earth toasting ECU?
MarkoNTL
- [Diy_efi] Question From Electromotive Inc.
Russell Turner
- [Diy_efi] R-12 & R-134a Trivia
AnalogWz at aol.com
- [Diy_efi] R-12 & R-134a Trivia
95_HMCS
- [Diy_efi] R-12 & R-134a Trivia
AnalogWz at aol.com
- [Diy_efi] R-12 & R-134a Trivia
Greg Hermann
- [Diy_efi] R-12 & R-134a Trivia
elcamino73
- [Diy_efi] RE fiero ecm #s
Dave Mitchell
- [Diy_efi] RE fiero ecm #s
Highhat
- [Diy_efi] some conversion
mester
- [Diy_efi] Standard O2 sensor and tuning
ingar
- [Diy_efi] Standard O2 sensor and tuning
Garfield Willis
- [Diy_efi] Standard O2 sensor and tuning
bcroe at juno.com
- [Diy_efi] Standard O2 sensor and tuning
ingar
- [Diy_efi] Standard O2 sensor and tuning
Bruce
- [Diy_efi] Standard O2 sensor and tuning
Barry Tisdale
- [Diy_efi] T-Ram Bin Needed
Jonathan Revis
- [Diy_efi] T-Ram Bin Needed
r71chevy at earthlink.net
- [Diy_efi] T-Ram Bin Needed
Jonathan Revis
- [Diy_efi] T-Ram Bin Needed
r71chevy at earthlink.net
- [Diy_efi] T-Ram Bin Needed
Shannen Durphey
- [Diy_efi] T-Ram Bin Needed
Jonathan Revis
- [Diy_efi] T-Ram Bin Needed
Jonathan Revis
- [Diy_efi] T-Ram Bin Needed
Shannen Durphey
- [Diy_efi] T-Ram Bin Needed
Doug Dayson
- [Diy_efi] T-Ram Bin Needed
Doug Dayson
- [Diy_efi] T-Ram Bin Needed
Programmer
- [Diy_efi] T-Ram Bin Needed
Shannen Durphey
- [Diy_efi] TB velocity calculation
Perry Harrington
- [Diy_efi] TBI on an Olds 403
Olle Wilson
- [Diy_efi] TBI selection question
mark
- [Diy_efi] tcc lockup help needed
Dan Griffin
- [Diy_efi] tcc lockup help needed
Bruce
- [Diy_efi] tcc lockup help needed
bill.shurvinton at nokia.com
- [Diy_efi] tcc lockup help needed
Bruce
- [Diy_efi] test
john smith
- [Diy_efi] tiny injection
Santi Udomkesmalee
- [Diy_efi] tiny injection
MarkoNTL
- [Diy_efi] tiny injection
Brian Renegar
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
Eric Aos
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
Perry Harrington
- [Diy_efi] tiny injection
bcroe at juno.com
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
Santi Udomkesmalee
- [Diy_efi] tiny injection
Perry Harrington
- [Diy_efi] tiny injection
MarkoNTL
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
Santi Udomkesmalee
- [Diy_efi] tiny injection
Marc Reibel
- [Diy_efi] tiny injection
Brian Dessent
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
elcamino73
- [Diy_efi] tiny injection
Tom Sharpe
- [Diy_efi] tiny injection
Marc Reviel
- [Diy_efi] tiny injection
Stephen Andersen
- [Diy_efi] tiny injection
Marc Reviel
- [Diy_efi] tiny injection
Stephen Andersen
- [Diy_efi] tiny injection
Marc Reviel
- [Diy_efi] tiny injection
Stephen Andersen
- [Diy_efi] tiny injection
Marc Reviel
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
elcamino73
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
elcamino73
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] tiny injection
Shannen Durphey
- [Diy_efi] tiny injection
elcamino73
- [Diy_efi] tiny injection
The Punisher
- [Diy_efi] Re: Tunning TDi engines, advice sought
Stephan Helbig
- [Diy_efi] Re: Tunning TDi engines, advice sought
Lachlan Chapman
- [Diy_efi] Re: Tunning TDi engines, advice sought
TVS
- [Diy_efi] unsubscribe
josh lane
- [Diy_efi] Re: Use 02 sensor on motorcycle?
Sven
- [Diy_efi] Use 02 sensor on motorcycle?
bcroe at juno.com
- [Diy_efi] Use O2 sensor on motorcycle?
bcroe at juno.com
- [Diy_efi] Use O2 sensor on motorcycle?
Garfield Willis
- [Diy_efi] Use O2 sensor on motorcycle?
Bruce
- [Diy_efi] Use O2 sensor on motorcycle?
bcroe at juno.com
- [Diy_efi] Use O2 sensor on motorcycle?
Sven
- [Diy_efi] Use O2 sensor on motorcycle?
bcroe at juno.com
- [Diy_efi] Use O2 sensor on motorcycle?
David Gravereaux
- [Diy_efi] Use O2 sensor on motorcycle?
bcroe at juno.com
- [Diy_efi] Use O2 sensor on motorcycle?
David Gravereaux
- [Diy_efi] Use O2 sensor on motorcycle?
Brian Dessent
- [Diy_efi] vette ECM bin
frank lupo
- [Diy_efi] vette ECM bin
Programmer
- [Diy_efi] vette ECM bin
frank lupo
- [Diy_efi] vette ECM bin
Bruce
- [Diy_efi] vette ECM bin
Programmer
- [Diy_efi] vette ECM bin
Programmer
- [Diy_efi] vette ECM bin
Perry Harrington
- [Diy_efi] was tiny inj: now supercharger
elcamino73
- [Diy_efi] was tiny inj: now supercharger
Bruce
- [Diy_efi] was tiny inj: now supercharger
elcamino73
- [Diy_efi] was tiny inj: now supercharger
The Punisher
- [Diy_efi] was tiny inj: now supercharger
elcamino73
- [Diy_efi] was tiny inj: now supercharger
The Punisher
- [Diy_efi] RE: Ways to effectively use O2 sensor on motorcycle?
Neil.Poersch at mts.mb.ca
- [Diy_efi] WB free air calibration
bcroe at juno.com
- [Diy_efi] WB O2 and Alternate Fuel
Hugh Keir
- [Diy_efi] WB O2 and Alternate Fuels
Garfield Willis
- [Diy_efi] WB O2 system
Dennis Gearon
- [Diy_efi] WB O2 system
Marteney, Steve
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Bernd Felsche
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Tom Sharpe
- [Diy_efi] WB O2 system
Dennis Gearon
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Stephen Andersen
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Gregory A. Parmer
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Barry Tisdale
- [Diy_efi] WB O2 system
Bruce
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Tom Sharpe
- [Diy_efi] WB O2 system
Barry Tisdale
- [Diy_efi] WB O2 system
Garfield Willis
- [Diy_efi] WB O2 system
Tom Sharpe
- [Diy_efi] WBO2 Project
Lou Fourquet
- [Diy_efi] WBO2 Project
bill.shurvinton at nokia.com
- [Diy_efi] What do you think about this?
Stephan Helbig
- [Diy_efi] What do you think about this?
Programmer
- [Diy_efi] AW: What do you think about this?
Jens Knickmeyer
- [Diy_efi] Where is the best place to weld a WB bung on 5.0
Brian Renegar
- [Diy_efi] Where is the best place to weld a WB bung on 5.0
Renaud
- [Diy_efi] Where is the best place to weld a WB bung on 5.0
Brian Renegar
- [Diy_efi] Where is the best place to weld a WB bung on 5.0 exhaust?
TROYXTROY
- [Diy_efi] Where is the best place to weld a WB bung on 5.0 exhaust?
TROYXTROY
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
elcamino73
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
elcamino73
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
Bruce
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
Bruce
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?
Bruce
- [Diy_efi] Which ECM?
Highhat
- [Diy_efi] Which ECM?- Coolant temp
AnalogWz at aol.com
- [Diy_efi] wide band
Speeds96 at aol.com
- [Diy_efi] winbin help with Audi bin's
Antti Lehtonen
- [Diy_efi] winbin help with Audi bin's
ECMnut at aol.com
- [Diy_efi] you need to look at this
steve ravet
- [Diy_efi] you need to look at this
Matt
- [Diy_efi] you need to look at this
Perry Harrington
- [Diy_efi] you need to look at this
Brian Dessent
- [Diy_efi] you need to look at this
Robert A. Ward Sr.
- [Diy_efi] you need to look at this
Bobby Riggs
- [Diy_efi] you need to look at this
Joe Piche
- [Diy_efi] you need to look at this
Brian Dessent
- [Diy_efi] Re: you need to look at this
J. Creech
- [Diy_efi] Re: you need to look at this
Jeremy Bertenshaw
- [Diy_efi] Re: you need to look at this
Perry Harrington
- [Diy_efi] Re: you need to look at this
J. Creech
- [Diy_efi] Re: you need to look at this
Kevin Wright (work)
- [Diy_efi] Re: you need to look at this
Kevin Wright (work)
- [Diy_efi] you need to look at this
Timothy J Cooper
- [Diy_efi] Zemco CompuCruise model 44
MarkoNTL
Last message date:
Sun Jun 30 15:29:46 GMT 2002
Archived on: Thu May 30 06:02:37 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).