[Diy_efi] injector placement

Steve Spiers s.spiers at xtra.co.nz
Thu Jun 27 18:03:05 GMT 2002


I read that fireing an injector upstream can help atomisation. Any comments on
that?

Steve

Ron Schroeder wrote:

> Hi Marko,
>
> 1973 Steyr Puch, PINZGAUER, former Swiss Army troop carrier.  Origionally
> had 2 Zeinith NDIX 36 2bbl carbs.  Still has 24V electrical system.
>
> Ron Schroeder
> WD8CDH
> day 631 344-4561
> nite 631 286-5677
>
> ----- Original Message -----
> From: "MarkoNTL" <marko.cosic at ntlworld.com>
> To: <diy_efi at diy-efi.org>
> Sent: Tuesday, June 25, 2002 4:42 PM
> Subject: Re: [Diy_efi] injector placement
>
> > > With my 2.5L inline 4 cyl engine,
> >
> > > The engine has a redline
> > > of 4500rpm and with carbs the torque peak was at 2000rpm.
> >
> > > When driving off-road in the
> > > lowest range without touching the throttle, the speed doesn't bog down
> as
> > > much with the higher injector placement.
> >
> > Which engine is this? Land-Rover unit?
> >
> > --
> > Marko Cosic
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list