[Diy_efi] injector placement

[Ron Schroeder]

Hi Marko,

1973 Steyr Puch, PINZGAUER, former Swiss Army troop carrier.  Origionally
had 2 Zeinith NDIX 36 2bbl carbs.  Still has 24V electrical system.

Ron Schroeder
WD8CDH
day 631 344-4561
nite 631 286-5677

----- Original Message -----
From: "MarkoNTL" <marko.cosic at ntlworld.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, June 25, 2002 4:42 PM
Subject: Re: [Diy_efi] injector placement


> > With my 2.5L inline 4 cyl engine,
>
> > The engine has a redline
> > of 4500rpm and with carbs the torque peak was at 2000rpm.
>
> > When driving off-road in the
> > lowest range without touching the throttle, the speed doesn't bog down
as
> > much with the higher injector placement.
>
> Which engine is this? Land-Rover unit?
>
> --
> Marko Cosic


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi