[Diy_efi] WB O2 system

[Tom Sharpe]

Thanks again for the grt info. 
On Tue, 18 Jun 2002 21:46:05 -0700, Garfield Willis <garwillis at msn.com> 
wrote :

> On Fri, 14 Jun 2002 14:02:10 -0400, Barry Tisdale
> <btisdale at cybersol.com> wrote:
> 
> >AFR meter = FJO WB.
> 
> OK, fine start.

> Now, here's the point, and then the question. You CANNOT assume that
> just because your indicated "AFR" from a petrol-calibrated AFR meter
> you're measuring with says 0.3AFR less, that you are *even* running
> richer, let alone an actual 0.3AFR richer. It's conceivable that with
> the right mix of additives, you could actually BE leaner, while your
> petrol-calibrated sensor/meter INDICATES 'richer'. 
> 

Just one more question to help us -???  Will a NB sensor side by side with 
a WB tell is where stoich is???  If so, we might be able to guestimate 10% 
rich (or lean).  I'm talking relative here.  We still need a dyno to get 
the 'best' numbers.   TomS

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi