[Diy_efi] 730 harnesses

[steve ravet]

Chris Carson wrote:
> Seeing as I'm on a budget, I need to find a cheap computer and harness. The
> yardes around here don't have any F/Y bodies with the computers and
> harnesses still intact, and from what i've seen they cost a fortune to buy
> from someone who knows what they have.

Take a look at www.cruzers.com/~ludis to find 730 applications.  Then
take a look at www.car-part.com for used car parts.  How does $20 sound
for a 730 from a '90 Pontiac 6000?

Engine harnesses go for $75-$100 no matter what they're from it seems. 
Sometimes they're cheaper on ebay, but you have to watch a while to find
one.  So you might as well get the right one, remember you need the
sensor and other connectors to match, not just the PCM connector.  Some
of those 730 apps are MAP, some are MAF.

Then buy the V8 calpak from the dealer (or www.gmpartsdirect.com), that
way you're starting with something known good.

--steve

-- 
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi